AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
• Quick-connect leads for contacts and coil
• 1 Form A, B and C contacts available
• AC and DC coils available
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE 40027037 ( DC coil only )
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. N.O.
Arrangement SPST (1 Form A, or B)
SPDT (1 Form C)
Operate Time
Release Time
15 ms at nominal coil voltage
Ratings Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A (Form A)
15 A (Form B)
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength 1500 Vrms contact to contact
(at sea level for 1 min.) 2500 Vrms contact to coil
Max. switched voltage: 277 VAC, 28 VDC
UL, CUR 1 Form A
30 A at 277 VAC, General Use [1][2]
28 A at 277 VAC, General Use, 100k cycles [1]
2 Hp at 250 VAC [1][2]
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
1 HP at 125 VAC [1][2]
30 A at 28 VDC [1]
20/60 (FLA/LRA) at 277 VAC 30k cycles [1]
Dropout
DC:Greater than 10%of nominal coil voltage
AC: Greater than 20%of nominal coilvoltage
Ambient Temperature At nominal coil voltage
Operating
1 Form B
-55°C (-67°F) to 105°C (221°F)
15 A at 277 VAC, General Use [1]
10 A at 28 VDC [1]
0.5 HP at 250 VAC [1]
0.25 HP at 125 VAC [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles [1]
Storage
-55°C (-67°F) to 155°C (311°F)
0.062" DA at 10–55 Hz
10 g
Vibration
Shock
1 Form C
30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2]
20/10 A (N.O./N.C.) at 28 VDC[1]
2/0.5 HP (N.O./N.C.) at 250 VAC[1][2]
1/0.25 HP (N.O./N.C.) at 125 VAC[1][2]
20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1]
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
VDE Contact factory for ratings
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
270°C (518°F)
5 seconds
Material
Silver cadmium oxide [1], silver tin oxide [2]
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
80°C (176°F)
Max. Immersion Time 30 seconds
COIL
Weight
36 grams
Power
At Pickup Voltage
(typical)
DC: 500 mW
AC: 1.4 VA
NOTES
Max. Continuous
Dissipation
DC: 1.7 W at 20°C (68°F)
AC: 2.7 VA at 20°C (68°F)
1. All values at 20°C (68°F).
Temperature Rise
Temperature
38°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. 155°C (311°F)
1/14/15