AZ2100
MINIATURE
POWER RELAY
FEATURES
• Versatility of both PC and “Trace-Saver” quick-connect
terminals on contacts
• 30 Amp switching capability for both N.O. and
N.C. contacts
• 1 Form A, B and C contacts available
• DC coils to 120 VDC
GENERAL DATA
• Life expectancy to 10 million operations
• Class B insulation for high temperature applications
• Class F (155°C) versions available
• Available with an epoxy seal for automatic wave
soldering and immersion cleaning
• UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact
rating requirements
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. (N.O.)
Operate Time (max.)
Release Time (max.)
Dielectric Strength
Max. 12 ms
Typical: 8 ms
Max. 5 ms
Typical: 3.5 ms
Group A: 2500 Vrms contact to coil
CONTACTS
(at sea level for 1 min.) Group B: 2000 Vrms contact to coil
Arrangement
SPDT (1 Form C)
1500 Vrms between open contacts
SPST (1 Form A and 1 Form B)
Insulation Resistance 100 megohms min. at 500 VDC, 20°C,
Ratings
Resistive load:
50% RH
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings.
AZ2100 Series meets UL 508 Group A spacing
requirements. AZ2101 Series meets UL 508
Group B spacing requirements.
-55°C (-67°F) to 100°C (212°F) Class B
-55°C (-67°F) to 125°C (257°F) Class F
-55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
Storage
Vibration
Shock
0.062" DA at 10–55 Hz
20 g
Material
Silver cadmium oxide
Resistance
< 20 milliohms initially
(at rated current, voltage drop method)
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, P.C. with quick-con-
nect tabs, .250" wide, on top
COIL
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
270°C (518°F)
5 seconds
Power
At Pickup Voltage
(typical)
500 mW
80°C (176°F)
Max. Continuous
Dissipation
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
Max. Immersion Time 30 seconds
Weight
43 grams
Temperature Rise
Temperature
38°C (68°F) at nominal coil voltage
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
5. Specifications subject to change without notice.
1/17/01W