AZ2100
40A MINIATURE
POWER RELAY
FEATURES
• Versatility of both PC and “Trace-Saver” quick-connect ter-
minals on contacts
• 40 Amp switching capability
• 1 Form A, B and C contacts available
• DC coils to 120 VDC
• Life expectancy to 10 million operations
• Class B insulation for high temperature applications
• Class F (155°C) version available
• Available with an epoxy seal for automatic wave
soldering and immersion cleaning
• Proof Tracking Index (PTI/CTI) 175
• UL, CUR file E44211 including versions meeting UL 508
and UL 873 spacing and contact rating requirements; VDE
40023154 (some models)
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. (N.O.)
Operate Time (max.)
Max. 12 ms
Typical: 8 ms
Release Time (max.)
Max. 5 ms
Typical: 3.5 ms
Dielectric Strength
(at sea level for 1 min.)
2500 Vrms contact to coil
1500 Vrms between open contacts
Insulation Resistance
1000 megohms min. at 500 VDC, 20°C,
50% RH
CONTACTS
Arrangement
SPDT (1 Form C)
SPST (1 Form A and 1 Form B)
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Ratings
Resistive load:
-55°C (-67°F) to 100°C (212°F) Class B
-55°C (-67°F) to 125°C (257°F) Class F
-55°C (-67°F) to 130°C (266°F) Class B
-55°C (-67°F) to 155°C (311°F) Class F
Max. switched power: 900 W or 10000 VA
Max. switched current: 40 A (Form A) 30 A (Form B)
Storage
Max. switched voltage: 30 VDC or 300 VAC
UL Rating: See chart for UL contact ratings. AZ2100
Series meets UL 508 Group A spacing and UL 873
refrigeration and safety control requirements. AZ2101
Series meets UL 508 Group B spacing requirements.
Vibration
Shock
0.062" DA at 10–55 Hz
20 g
Enclosure
Terminals
P.B.T. polyester
VDE Rating:
AZ2100-1A - 25 A at 250 VAC, 10K cycles, resistive
AZ2100-1C - 20 A at 250 VAC, 10k cycles, resistive
Tinned copper alloy, P.C. with quick-con
nect tabs, .250" wide, on top
Note: Allow suitable slack on leads when wiring,
do not subject the terminals to excessive force.
Material
Silver cadmium oxide
Resistance
< 20 milliohms initially
(at rated current, voltage drop method)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
43 grams
COIL
Power
At Pickup Voltage
(typical)
500 mW
Max. Continuous
Dissipation
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
NOTES
1. All values at 20°C (68°F).
Temperature Rise
Temperature
38°C (68°F) at nominal coil voltage
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
5. Specifications subject to change without notice.
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
4/1/14