AFBR-703SDZ
10Gb Ethernet, 850 nm, 10GBASE-SR,
SFP+ Transceiver
Data Sheet
Description
Features
• Avago 850nm VCSEL source and Transmitter Optical
The Avago AFBR-703SDZ transceiver is part of a family of
SFP+ products. This transceiver utilizes Avago’s 850nm
VCSEL and PIN Detector technology to provide an IEEE
10Gb Ethernet design compliant with the 10GBASE-SR
standard. The AFBR-703SDZ transceiver is designed to
enable 10Gb Ethernet equipment designs with very high
port density based on the new electrical and mechani-
cal specification enhancements to the well known SFP
specifications developed by the SFF Committee. These
specifications are referred to as SFP+ to recognize these
enhancements to previous SFP specifications used for
lower speed products. Avago Technologies is an active
participant in the SFF Committee specification develop-
ment activities.
Subassembly technology
• Avago PIN detector and Receiver Optical Subassembly
technology
•ꢀ Typical power dissipation 600mW
• Full digital diagnostic management interface
•ꢀ Avago SFP+ package design enables equipment EMI
performance in high port density applications with
margin to Class B limits
Specifications
• Optical interface specifications per IEEE 802.3ae
10GBASE-SR
• Electrical interface specifications per SFF Committee
SFF 8431 Specifications for Enhanced 8.5 and 10
Gigabit Small Form Factor Pluggable Module “SFP+”
Related Products
• The AFBR-703ASDZ is an SFP+ 10 Gigabit Ethernet
10GBASE-SR transceiver with case temperature
operated at 0-85 °C for use on multimode fiber cables.
It is best suited for OM3 high bandwidth MMF link
applications with link lengths up to 300 meters.
• Management interface specifications per SFF
Committee SFF 8431 and SFF 8472 Diagnostic
Monitoring Interface for Optical Transceivers
• Mechanical specifications per SFF Committee SFF
• AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASE-
LRM transceiver for 220 meter operation in all MMF
link applications including OM1 and OM2 legacy fiber
cables and new high bandwidth OM3 fiber cables.
8432 Improved Pluggable Formfactor “IPF”
• LC Duplex optical connector interface confirming to
ANSI TIA/EA 604-10 (FOCIS 10A)
• Compliant to Restriction on Hazardous Substances
• AFCT-701SDZ (AFCT-701ASDZ) with case temperature
0-70 (0-85) °C SFP+ 10 Gigabit Ethernet 10GBASE-LR
transceiver for operation in SMF link applications to
10 km
(RoHS) per EU and China requirements
• Class 1 Eye safe per requirements of IEC 60825-1 /
CDRH
•ꢀ AFCT-5016Z SFP+ Evaluation Board The purpose of
this SFP+ evaluation board is to provide the designer
with a convenient means for evaluating SFP+ fiber
optic transceivers.
Patent - www.avagotech.com/patents