5秒后页面跳转
ATA6829-T3QY PDF预览

ATA6829-T3QY

更新时间: 2024-01-27 21:18:30
品牌 Logo 应用领域
爱特美尔 - ATMEL 外围驱动器驱动程序和接口接口集成电路光电二极管异步传输模式ATM
页数 文件大小 规格书
16页 619K
描述
Dual Triple DMOS Output Driver with Serial Input Control

ATA6829-T3QY 技术参数

是否Rohs认证: 符合生命周期:Transferred
零件包装代码:SOIC包装说明:HLSOP,
针数:16Reach Compliance Code:compliant
ECCN代码:EAR99HTS代码:8542.39.00.01
风险等级:7.73内置保护:OVER CURRENT; THERMAL; UNDER VOLTAGE
接口集成电路类型:SIPO BASED PERIPHERAL DRIVERJESD-30 代码:R-PDSO-G16
长度:9.9 mm功能数量:1
端子数量:16输出电流流向:SOURCE AND SINK
封装主体材料:PLASTIC/EPOXY封装代码:HLSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, HEAT SINK/SLUG, LOW PROFILE
认证状态:Not Qualified座面最大高度:1.62 mm
最大供电电压:5.25 V最小供电电压:4.75 V
标称供电电压:5 V电源电压1-最大:40 V
电源电压1-分钟:7.5 V表面贴装:YES
技术:BCDMOS端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
断开时间:20 µs接通时间:20 µs
Base Number Matches:1

ATA6829-T3QY 数据手册

 浏览型号ATA6829-T3QY的Datasheet PDF文件第2页浏览型号ATA6829-T3QY的Datasheet PDF文件第3页浏览型号ATA6829-T3QY的Datasheet PDF文件第4页浏览型号ATA6829-T3QY的Datasheet PDF文件第5页浏览型号ATA6829-T3QY的Datasheet PDF文件第6页浏览型号ATA6829-T3QY的Datasheet PDF文件第7页 
Features  
Supply Voltage up to 40V  
RDSon Typically 0.5Ω at 25°C, Maximum 1.1Ω at 150°C  
Up to 1.5A Output Current  
Three High-side and Three Low-side Drivers Usable as Single Outputs or Half Bridges  
Capable to Switch all Kinds of Loads such as DC Motors, Bulbs, Resistors, Capacitors  
and Inductors  
PWM Capability for Each Output Controlled by External PWM Signal  
No Shoot-through Current  
Dual Triple  
DMOS Output  
Driver with  
Serial Input  
Control  
Very Low Quiescent Current IS < 5 µA in Standby Mode over Total Temperature Range  
Outputs Short-circuit Protected  
Selective Overtemperature Protection for Each Switch and Overtemperature  
Prewarning  
Undervoltage Protection  
Various Diagnostic Functions such as Shorted Output, Open Load, Overtemperature  
and Power-supply Fail Detection  
Serial Data Interface, Daisy Chain Capable, up to 2 MHz Clock Frequency  
SO16 Power Package  
1. Description  
The ATA6829 is a fully protected driver interface designed in 0.8-µm BCDMOS tech-  
nology. It is used to control up to six different loads by a microcontroller in automotive  
and industrial applications.  
ATA6829  
Each of the three high-side and three low-side drivers is capable to drive currents up  
to 1.5A. Each driver is freely configurable and can be controlled separately from a  
standard serial data interface. Therefore, all kinds of loads such as bulbs, resistors,  
capacitors and inductors can be combined. The IC design especially supports the  
applications of H-bridges to drive DC motors. The capability to control each output  
with an external PWM signal opens additional applications.  
Protection is guaranteed regarding short-circuit conditions, overtemperature and  
undervoltage. Various diagnostic functions and a very low quiescent current in  
stand-by mode opens a wide range of applications. Automotive qualification (protec-  
tion against conducted interferences, EMC protection and 2-kV ESD protection) gives  
added value and enhanced quality for exacting requirements of automotive  
applications.  
4531G–BCD–07/09  

与ATA6829-T3QY相关器件

型号 品牌 描述 获取价格 数据表
ATA6829-T3QY-44 MICROCHIP SIPO Based Peripheral Driver, 6 Driver, BCDMOS, PDSO16

获取价格

ATA6829-T3SY ATMEL Dual Triple DMOS Output Driver with Serial Input Control

获取价格

ATA6830 ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830_05 ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830-PKH ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格

ATA6830-PKHW ATMEL INTELLIGENT STEPPER MOTOR DRIVER

获取价格