ATSAMB11-MR210CA/MR510CA
Ultra Low Power BLE 4.1 Module
DATASHEET
Description
The Atmel® ATSAMB11-MR210CA is an ultra-low power Bluetooth® SMART (BLE
4.1) module with Integrated MCU, Transceiver, Modem, MAC, PA, TR Switch, and
Power Management Unit (PMU). It is a standalone Cortex®-M0 applications
processor with embedded Flash memory and BLE connectivity.
The qualified Bluetooth Smart protocol stack is stored in dedicated ROM, the
firmware includes L2CAP service layer protocols, Security Manager, Attribute
protocol (ATT), Generic Attribute Profile (GATT), and the Generic Access Profile
(GAP). Additionally, application profiles such as Proximity, Thermometer, Heart Rate,
Blood Pressure, and many others are supported and included in the protocol stack.
The module contains all circuitry required including a ceramic high gain antenna,
26MHz crystal, and PMU circuitry. The customer simply needs to place the module
on the customer PCB design, provide power and a 32kHz Real Time Clock or crystal.
All References to ATSAMB11-MR210CA, refer to the ATSAMB11-MR510CA as well.
Features
Complies with Bluetooth V4.1, ETSI EN 300 328 and EN 300 440 Class 2, FCC
CFR47 Part 15, and ARIB STD-T66
Bluetooth Certification
– QD ID Controller (see declaration D028678)
– QD ID Host (see declaration D028679)
2.4GHz transceiver and Modem
– -95dBm/-93dBm programmable receiver sensitivity
– -20 to +3.5dBm programmable TX output power
– Integrated T/R switch
– Incorporated antenna
ARM® Cortex®-M0 32-bit processor
– Single wire Debug (SWD) interface
– Four-channel DMA controller
– Brown-out detector and Power On Reset
– Watch Dog Timer
Memory
– 128KB embedded RAM (96KB available for application)
– 128KB embedded ROM
– 256KB stacked Flash memory
Hardware Security Accelerators
– AES-128
Atmel-42498D-SAMB11-MR210CA-MR510CA_Datasheet_09/2016