AIRCOREINDUCTORS
AT350RAT
AT394RAT
200°C AirCoreInductors
■ High Q over a wide range of frequencies
■ Special materials allow operation in ambient temperatures
as low as –60°C and up to 200°C.
■ Passes NASA low outgassing specifications
Terminations Tin-lead (63/37) over copper
Ambient temperature –60°C to +150°C with Imax current, +150°C
to +200°C with derated current
Storage temperature Component: –60°C to +200°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging
AT350RAT: 500 per 7″ reel Plastic tape: 8 mm wide, 0.3 mm
thick, 4 mm pocket spacing, 1.5 mm pocket depth
AT394RAT: 500 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm
thick, 4 mm pocket spacing, 1.6 mm pocket depth
SRF DCR
L2 Percent Q3 min4 max5 Imax
Partnumber1 Turns (nH)
tol
min (GHz) (mOhm) (A)
AT350RAT1N7KSZ
AT350RAT2N6JSZ
AT350RAT3N9_SZ
AT350RAT5N4_SZ
2
3
4
5
1.65
2.55
3.85
5.40
10
5
5,2
5,2
100 10.0
4.0
5.0
6.0
8.0
1.6
1.6
1.6
1.6
100
100
100
8.2
7.5
7.0
AT394RAT5N6_SZ
AT394RAT7N2_SZ
AT394RAT8N8_SZ
AT394RAT9N9_SZ
6
7
8
9
5.60
7.15
8.80
9.85
5,2
5,2
5,2
5,2
5,2
100
100
100
100
100
6.5
6.0
6.0
5.2
4.6
9.0
10
12
13
14
1.6
1.6
1.6
1.6
1.6
AT394RAT13N_SZ 10 12.55
1. When ordering, specify tolerance and testing codes:
AT394RAT10GSZ
Tolerance: G = 2% J = 5%
Testing:
Z = COTS
H = Group A screening per Coilcraft CP-SA-10001
N = Group A screening per Coilcraft CP-SA-10003
2. Inductance measured at 800 MHz on an Agilent/HP 4286A or equiva-
lent with a Coilcraft SMD-A test fixture and correlation.
3. Q measured at 800 MHz on an Agilent/HP 4291A or equivalent with a
16193A test fixture or equivalent.
4. SRF measured on an Agilent/HP 8753ES or equivalent with a Coilcraft
CCF1268 test fixture. Parts with SRF >5 GHz are verified to >5 GHz in
screening.
5. DCR measured on a Keithley 580 Micro-Ohmmeter or equivalent.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
inches
Dimensions are in
mm
Document AT163-1 Revised 06/13/13
®
This product may not be used in medical or high
Fax 847-639-1508
Email cps@coilcraft.com Specifications subject to change without notice.
www.coilcraft-cps.com Please check our web site for latest information.
risk applications without prior Coilcraft approval.
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
© Coilcraft, Inc. 2013