Features
• Serial Peripheral Interface (SPI) Compatible
• Supports SPI Modes 0 (0,0) and 3 (1,1)
– Data Sheet Describes Mode 0 Operation
• Low-voltage and Standard-voltage Operation
– VCC = 1.8V to 5.5V
• 20 MHz Clock Rate (5V)
• 8-byte Page Mode
• Block Write Protection
SPI Serial
EEPROM
1K (128x8)
– Protect 1/4, 1/2, or Entire Array
• Write Protect (WP) Pin and Write Disable Instructions for Both Hardware and Software
Data Protection
• Self-timed Write Cycle (5 ms max)
• High Reliability
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
2K (256x8)
• Green (Pb/Halogen-free/Rohs Compliant) Packaging Options
• Die Sales: Wafer Form, Waffle Pack, Bumped Wafers
4K (512x8)
Description
AT25010B
AT25020B
AT25040B
The AT25010B/020B/040B provides 1024/2048/4096 bits of serial electrically eras-
able programmable read-only memory (EEPROM) organized as 128/256/512 words
of 8 bits each. The device is optimized for use in many industrial and commercial
applications where low-power and low-voltage operation are essential. The
AT25010B/020B/040B is available in space saving, JEDEC SOIC, UDFN, TSSOP,
XDFN and VFBGA packages.
Preliminary
The AT25010B/020B/040B is enabled through the Chip Select pin (CS) and accessed
via a three-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO),
and Serial Clock (SCK). All programming cycles are completely self-timed, and no
separate erase cycle is required before write.
Block write protection is enabled by programming the status register with one of four
blocks of write protection. Separate Program Enable and Program disable instructions
are provided for additional data protection. Hardware data protection is provided via
the WP pin to protect against inadvertent write attempts. The HOLD pin may be used
to suspend any serial communication without resetting the serial sequence.
Table 0-1.
Pin Configuration
SOIC, TSSOP
Pin Name
CS
Function
CS
SO
VCC
1
2
3
4
8
7
6
5
Chip Select
HOLD
SCK
SI
WP
SCK
SI
Serial Data Clock
Serial Data Input
Serial Data Output
Ground
GND
SO
8-lead UDFN, XDFN
8-ball VFBGA
GND
VCC
8
7
6
5
1
2
3
4
VCC
HOLD
SCK
SI
8
7
6
5
1
2
3
4
CS
VCC
HOLD
SCK
SI
CS
Power Supply
Write Protect
SO
SO
WP
WP
GND
WP
GND
HOLD
Suspends Serial Input
8707B–SEEPR–3/10
Bottom View
Bottom View