Features
• Standard-voltage Operation
– 2.7 (VCC = 2.7V to 5.5V)
• Automotive Temperature Range –40C to 125C
• Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K),
1024 x 8 (8K) or 2048 x 8 (16K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 400 kHz Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
• Partial Page Writes are Allowed
• Self-timed Write Cycle (5 ms max)
• High-reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
• 8-lead JEDEC SOIC and 8-lead TSSOP Packages
Two-wire
Automotive
Temperature
Serial EEPROM
1K (128 x 8)
Description
2K (256 x 8)
The AT24C01A/02/04/08A/16A provides 1024/2048/4096/8192/16384 bits of serial
electrically erasable and programmable read-only memory (EEPROM) organized as
128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many
automotive applications where low-power and low-voltage operation are essential.
The AT24C01A/02/04/08A/16A is available in space-saving 8-lead JEDEC SOIC and
8-lead TSSOP packages and is accessed via a two-wire serial interface. In addition,
the entire family is available in 2.7V (2.7V to 5.5V) versions.
4K (512 x 8)
8K (1024 x 8)
16K (2048 x 8)
AT24C01A(1)
AT24C02(2)
AT24C04
AT24C08A
AT24C16A(3)
1. AT24C01A not recommended
for new design; Replaced by
AT24C01B Automotive.
8-lead SOIC
Table 1. Pin Configurations
Pin Name
A0 A2
SDA
Function
A0
A1
1
2
3
4
8
7
6
5
VCC
WP
Address Inputs
Serial Data
A2
SCL
SDA
GND
SCL
Serial Clock Input
Write Protect
No Connect
WP
8-lead TSSOP
NC
A0
A1
1
2
3
4
8
7
6
5
VCC
WP
A2
SCL
SDA
GND
2. AT24C02 not recommended for
new design; Replaced by
AT24C02B Automotive.
3. AT24C16A not recommended
for new design; replaced by
AT24C16C Automotive.
5092D–SEEPR–4/07
1