Global Mixed-mode Technology Inc.
AT1739
LCD Panel Step- up Converter with Analog Multi-
Function Outputs
Features
General Description
The AT1739 offers a complete power-supply solution
for TFT LCD panels used in LCD monitors and NB LCD
panels. The AT1739 consists of a high-performance
step-up converter, a low-power charge-pump regulator,
a high-performance linear regulator, an operational
amplifier, a voltage detector and a logic-controlled
gate-on pulse modulator.
2.6V to 5.5V Input Supply Range
640kHz/1.2MHz Current-Mode PWM Step-Up
Regulator:
Fast Transient Response
1.0% High-Accuracy Output Voltage
Built-In 18V, 2.0A, 0.2Ω N-Channel MOSFET
Programmable Soft-Start
Current-Limit
Latched Fault Protection with Timer
High Efficiency
Gate-On Charge Pump Regulator Controller
with Latched Fault Protection with Timer
High-Performance Linear Regulator:
1.5% Output Accuracy
Works with Small Ceramic Output Capacitors
Fast Transient Response
The step-up DC-DC converter provides the regulated
supply voltage for the panel source driver ICs. The
charge-pump regulator generates the positive gate-on
supply voltage. The operational amplifier supplies the
VCOM buffer with high output current, fast slew rate and
wide bandwidth performances for driving capacitive loads.
The high-voltage gate-on pulse modulator to control
the positive gate-on output voltage waveform for
reducing the flicker on TFT LCD panel.
Foldback Current Limit
The high-performance linear regulator uses an internal
P-channel MOSFET to supply load currents up to 350mA.
It provides the regulated supply voltage for the TCON IC.
High-Current Operational Amplifier:
±150mA Output Short-Circuit Current
13V/µs Slew Rate
12MHz, -3dB Bandwidth
Rail-to-Rail Input/Output
Gate-on Pulse Modulator with Adjustable Delay
for Sequence Control
The voltage detector with adjustable detected
voltage-point and delay-time monitors the input supply
voltage to prevent the improper shutdown of the
system power application.
Voltage Detector with Adjustable Delay
The AT1739 is available in a 24-pin thin QFN package
which is 4mm x 4mm with a maximum thickness of
0.8mm for ultra-thin LCD panel design.
Applications
Ordering Information
LCD Monitor Panel Modules
NB LCD Panel Modules
Automotive Displays
ORDER
NUMBER
AT1739R51U
TEMP.
RANGE
PACKAGE
(Green)
MARKING
A1739
-40°C to 85°C TQFN4X4-24
Note: R5: TQFN4X4-24
1 : Bonding Code
U: Tape & Reel
Pin Configuration
LX
VDD
1
2
3
4
5
6
18
17 DRVP
16 FBP
IN
SS
Thermal
Pad
AGND
FBL
15 VPSRC
14 GON
13 DRN
OUTL
AT1739 TQFN4X4-24
Ver: 0.2
Dec 04, 2008
TEL: 886-3-5788833
http://www.gmt.com.tw
1