Datasheet
AS8650A
High-efficient Power Management Device with High-speed CAN
Interface
1 General Description
The AS8650A is a companion IC which combines power
2 Key Features
DCDC converter for 5V output with very high efficiency
2 programmable voltage regulators in the range of 1.8V to 3.3V
High-speed CAN interface (ISO 11898-5) with remote wake-up
Comprehensive voltage monitoring
management functions and a fully conforming high-speed CAN
Transceiver in one high performance analog device for automotive
applications. The AS8650A is powered by the battery, provides 4
output voltage levels of which 3 outputs can be individually
programmed in the range of 1.8V to 3.3V with a maximum current
consumption up to 120mA at the LDO voltage regulator outputs. An
integrated DCDC converter with a very high efficiency for the 5V
output supplies the 3 voltage regulators and ensures a voltage
stability of ± 2.5%. The combination of DCDC converter with low-
drop-out voltage regulators makes the AS8650A suitable for all
Automotive Control Units where power efficiency is a must.
Configurable watchdog functions for start-up, operation, and
standby
Automatic thermal shutdown protection
Excellent EMC performance with outstanding switching
technology for the DCDC converter
Ambient temperature range from -40°C to +105°C in maximum
The AS8650A provides a high-speed CAN interface up to 1Mbps
communication rate conforming to ISO 11898-5. The AS8650A
provides wake-up via remote wake-up at CAN bus lines and a local
wake pin. The watchdog unit provides three different timing
functions: start-up, window- and time-out watchdog; configurable via
the SPI and I²C interface.
load conditions
Lead-free 36-pin QFN (6x6x0.9) package
3 Applications
The AS8650A provides high efficient and flexible power supply
together with state-of-the-art high-speed CAN Interface for
automotive control units.The device is pin compatible with AS8550
(LIN interface) in order to change from CAN to LIN easy.
Voltage monitoring is implemented for the battery supply, DCDC
output and the 3 LDO regulator outputs. Undervoltage will be
signalled on the INTN pin to the microcontroller. All diagnostics and
status flags can be accessed with the SPI interface.
The product is available in a 36-pin QFN (6x6x0.9) package.
Figure 1. AS8650A Block
VSUP
AS8650A
I2C_EN
FB
LX
CSSPI
DC / DC Converter 5V
SCLKI2C /SCLKSPI
SDAI2C / SDISPI
SDOSPI
I2C
SPI
V5V_LDO1
V5V_LDO2
V5V_LDO3
INTN
Configurable
Voltage
VREG
CANH
SPLIT
CANL
RxD
Regulator
High-speed
CAN
Transceiver
Digital
Logic
Configurable
VREG
Voltage
Regulator
TxD
Configurable
VREG
Watchdog
Voltage
RESET
Regulator
WAKE
GND
www.austriamicrosystems.com/AS8650
Revision 2.0
1 - 46