austriamicrosystems
Data Sheet
AS1904, AS1905, AS1906
Ultra Low-Power µP Supervisory Circuit
1 General Description
The AS1904/5/6 family is an ultra low-power supervisory
circuit device.
2 Key Features
Low 150nA (typical) Supply Current
Precision Monitoring of 2.5-, 3-, and 3.3V-Power
Supplies
The device can be used to monitor the supply voltage of
digital systems and microprocessors and initiate a reset
when the voltage goes below a predefined threshold.
The duration of the reset is 5/20/100/500ms (typ.) after
the supply voltage has risen above the threshold.
Supply Voltage Range 1.0 to 3.6V
Reset Threshold Available from 2.2 to 3.1V
Available in three Versions
The device exhibits excellent reliability and can reduce
application costs by eliminating all external components.
- AS1904 Push-Pull RESETN
- AS1905 Push-Pull RESET
The device is available with different output drivers:
- AS1906 Open Drain RESETN
4 Time-Out Periods Ranging from 5 to 500ms
The AS1904 has a push-pull driver with an active low
reset.
Detection Voltage Accuracy: 1.5%
The AS1905 uses the same output stage as the
AS1904, but has an active high reset.
Temperature Range: -40 to +85°C
SOT23-3 Package
The AS1906 has an open drain output with active low
reset.
Pin Compatible to MAX6326/6327/6328
All devices operate down to a voltage of 1V.
Superior Upgrade to austriamicrosystems
AS1901/2/3 Device Family
The reset thresholds are factory-trimmable between
2.2V and 3.08V in steps of approximately 100mV.
Each device of the AS1904/5/6 family is offered with four
time-out periods of 5/20/100/500ms.
3 Applications
The extremely low current consumption of only 150nA
(typ) at 3.3V makes the device ideal for use in portable
applications.
Computers
Intelligent Instruments
Controllers
All devices are available in a 3-pin SOT23 package.
Critical Microprocessor and Microcontroller
Power Monitoring
Portable/Battery-Powered Equipment
Automotive
Figure 1. Functional Block Diagrams
VCC
VCC
3
3
VDD
VCC
VDD
VCC
AS1904
AS1905
AS1906
Microprocessor
Microprocessor
2
2
RESET,
RESETN
RESET
GND
RESETN
RESET I/O
GND
GND
GND
1
1
www.austriamicrosystems.com
Revision 1.4
1 - 9