TESTING
GU (General Use) Type
SOP Series
1- Channel (Form A)
4-Pin Type
PhotoMOS
RELAYS
(W)4.3 × (L)4.4 × (H)2.1 mm (W).169 ×
(L).173 × (H).083 inch —approx. 70% of
the volume and 70% of the footprint size
of SO package 6-pin type PhotoMOS Re-
lays.
3. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
4.3±0.2
.169±.008
4.4±0.2
.173±.008
2.1±0.2
.083±.008
4. Low-level off state leakage current
In contrast to the SSR with an off state
leakage current of several milliamps, the
PhotoMOS relay features a very small off
state leakage current of only 100 pA
(AQY214S) even with the rated load volt-
age of 400 V.
(6-pin)
(4-pin)
Approx. 70%
mm inch
Volume
1
2
4
3
Approx. 70%
Footprint
TYPICAL APPLICATIONS
FEATURES
1. SO package 4-Pin type in super min-
iature design
The device comes in a super-miniature
SO package 4-Pin type measuring
• Telecommunications (PC, Electoronic
Notepad)
• Measuring and Testing equipment
• Factory Automation Equipment
• Security equipment
2.Tape and reel
The device comes standard in a tape and
reel (1,000 pcs./reel) to facilitate automat-
ic insertion machines.
• High speed inspection machines
TYPES
AC/DC type
Output rating*
Part No.
Packing quantity in tape
and reel
Load voltage
350 V
Load current
120 mA
Picked from the 1/2-pin side Picked from the 3/4-pin side
AQY210SX
AQY214SX
AQY210SZ
AQY214SZ
1,000 pcs.
400 V
100 mA
* Indicate the peak AC and DC values.
Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 100 pcs.;
Case: 2,000 pcs.)
(2) For space reasons, the top two letters of the product number "AQY" and "S" are omitted on the product seal.The package type indicator "X"
and "Z" are omitted from the seal. (Ex. the label for product number AQY210S is 210).
RATING
AC/DC type
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item
Symbol
IF
AQY210S
AQY214S
Remarks
LED forward current
LED reverse voltage
Peak forward current
Power dissipation
50 mA
3 V
VR
Input
IFP
1 A
f = 100 Hz, Duty factor = 0.1%
Pin
75 mW
Load voltage (peak AC)
Continuous load current (peak AC)
Peak load current
VL
350 V
0.12 A
0.3 A
400 V
0.1 A
IL
Output
Ipeak
Pout
PT
0.24 A
100ms (1 shot), VL = DC
Power dissipation
300 mW
350 mW
Total power dissipation
I/O isolation voltage
Viso
Topr
Tstg
1,500 V AC
Operating
Storage
–40°C to +85°C –40°F to +185°F
–40°C to +100°C –40°F to +212°F
Non-condensing at low temperatures
Temperture limits
44