16W Single Output Switching Power Supply
APV-16 series
Features :
Constant voltage design
Universal AC input / Full range
Protections: Short circuit / Over current / Over voltage
Fully isolated plastic case
Cooling by free air convection
Small and compact size
Pass LPS
Suitable for LED lighting and moving sign applications
100% full load burn-in test
Low cost, high reliability
2 years warranty
110
F
SELV
LPS
SPECIFICATION
MODEL
APV-16-5
APV-16-12
APV-16-15
APV-16-24
DC VOLTAGE
5V
12V
15V
24V
RATED CURRENT
CURRENT RANGE
RATED POWER
2.6A
0 ~ 2.6A
13W
1.25A
1A
0.67A
0 ~ 1.25A
15W
0 ~ 1A
15W
0 ~ 0.67A
16.08W
150mVp-p
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE TOLERANCE Note.3 5.0%
120mVp-p
120mVp-p
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT
1.0%
2.0%
Note.6 1500ms, 30ms / 230VAC
1500ms,30ms / 115VAC at full load
20ms/230VAC
Note.4 90 ~ 264VAC
47 ~ 63Hz
12ms/115VAC at full load
127 ~ 370VDC
76%
80%
81%
83%
INPUT
0.3A/230VAC 0.5A/115VAC
COLD START 35A/115VAC
0.25mA / 240VAC
INRUSH CURRENT(max.)
LEAKAGE CURRENT
70A/230VAC
Above 105% rated output power
OVER CURRENT
Protection type : Hiccup mode, recovers automatically after fault condition is removed
5.75 ~ 6.75V 13.8 ~ 16V 17.5 ~ 21V
PROTECTION
ENVIRONMENT
27.6 ~ 32.4V
OVER VOLTAGE
WORKING TEMP.
Protection type : Shut off o/p voltage, clamping by zener diode
-30 ~ +70 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Design refer to TUV EN60950-1, EN61347-2-13,UL8750
I/P-O/P:3.75KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
SAFETY &
EMC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3
Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), criteria A
1145.7K hrs min. MIL-HDBK-217F (25 )
EMC IMMUNITY
MTBF
77*40*29mm (L*W*H)
OTHERS
NOTE
DIMENSION
0.1Kg; 120pcs/14Kg/0.93CUFT
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
File Name:APV-16-SPEC 2011-07-09