APL3546A
Power -Distribution Switches with Soft Start
General Description
Features
The APL3546A is a power-distribution switch with some
·
·
78mW High Side MOSFET
protection functions. The device incorporates a 78mW N-
Soft Start Time Programmable by External
Capacitor
channel MOSFET power switch that is controlled by an
enable logic pin and has a SS pin dedicated to soft start
ramp-up rate control that can be used in application where
the inrush current is concerned.
·
·
·
·
·
·
Wide Supply Voltage Range: 4.5V to 24V
Current Limit Protections
Under Voltage Lockout Protection
Over-temperature Protection
Logic Level Enable Input
The device integrates some protection features, includ-
ing current limit protection, over-temperature protection,
UVLO and current limit setting. The current limit protec-
tion can protect down-stream devices from catastrophic
failure by limiting the output current at current limit thresh-
old during over-load or short circuit events. The over-tem-
perature protection function shuts down IC when the junc-
tion temperature rises beyond 150oC. The UVLO function
keeps the power switch in off state until there is a valid
input voltage present. The current limit can be set by con-
necting resistor from the current limit adjustable pin ISET
to ground.
Lead Free and Green Devices Available (RoHS
Compliant)
·
Current Limit setting
Applications
·
·
·
·
TFT LCD Modules
Notebook and Desktop Computers
USB Ports
High-side Power Protection Switches
Simplified Application Circuit
APL3546A
VIN VOUT
SS
ISET
EN
GND
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright ã ANPEC Electronics Corp.
1
www.anpec.com.tw
Rev. A.3 - Jul., 2013