Advanced Power
Electronics Corp.
APE2902
MICROPOWER VFM STEP-UP DC/DC CONVERTER
FEATURES
DESCRIPTION
The APE2902 is a high efficiency VFM Step-up DC/DC
converter for small, low input voltage or battery powered
systems with ultra low quiescent supply current. The
APE2902 accept a positive input voltage from start-up
voltage to VOUT and convert it to a higher output voltage in
the 2.5 to 5V range.
Very Low Supply Current is 22uA (typ.)
Maximum Shutdown Current <1uA
Output Voltage is Available form 2.5V to 5.0V
by 0.1V Steps
Output Voltage Accuracy ±5%
Output Current up to 100mA
Low Ripple and Low Noise
Very Low Start-up Voltage
High Efficiency (Vout = 5V TYP. 87%)
Few External Components
Internal Soft-Start
The APE2902 combine ultra low quiescent supply
current and high efficiency to give maximum battery life. The
high switching frequency and the internally limited peak
inductor current permits the use of small, low cost inductors.
Only three external components are needed an inductor a
diode and an output capacitor.
The APE2902 is suitable to be used in battery powered
equipment where low noise, low ripple and ultra low supply
current are required. Operating shutdown function is outside
controlling. If EN connects to GND, the IC was been shut
down and then the supply current is lower to 1uA.The
APE2902 is available in very small package: SOT-23-5L.
Typical applications are pagers, cameras & video
camera, cellular telephones, wireless telephones, palmtop
computer, battery backup supplies, battery powered
equipment.
Low Profile: SOT-23-5L Pb-Free
TYPICAL APPLICATION
D1
B140
VOUT
L1
VIN
1
2
1
2
47uH
C2
U1
C1
100uF
C4
SW
GND
OUT
NC
0.1uF
C3
EN
0.1uF
47uF
Enable Input
APE2902
ORDER/MARKING INFORMATION
APE2902XX-XX
WW : 01~26(A~Z)
t&XYW
Package Type
Vout
27~52(A~Z)
Year : 8 = 2008
A = 2010
22 : 2.2V
25 : 2.5V
Y5 : SOT-23-5L
Y5R : SOT-23-5L
26 : 2.6V
27 : 2.7V
Identification Code
:
:
Identification Code see page8.
50 : 5.0V
Data and specifications subject to change without notice
1
200907313