T1/E1/J1 SMD Line Interface Hybrid for PMC Octal LIU
APC82247s
•
•
•
•
•
•
Suitable for all T1/E1/J1 applications
Compatible with PMC4318 3108 Octal LIU chip
Minimum Board Space requirements
Designed for multiple interface line cards
Surface Mount Footprint
In order to maintain the overvoltage/overcurrent capability of the module, the recommendations for the tracking between
the Line and the Tip and Ring port of the module are as follows:
Trace width = 0.025in
1oz Copper
Trace separation between Tip and Ring 0.025 in minimum to the line part of the module
•
•
Longitudinal protection circuit designed to meet FCC part 68, Telcordia GR1089 for 1st level and 2nd level lighting and
1st level power line cross events and EMC EN300 386-2 (European Standard)
Safety UL 60950 and IEC 60950: Pending approvals
SCHEMATIC
8
1
TX
9
6
7
2
VCC
GND
LINE SIDE
IC SIDE
3
5
4
10
RX
11
INCLUDES: ISOLATION TRANSFORMERS, PROTECTION COMPONENTS (LINE AND CHIP SIDE)
SAFETY COMPONENTS: SRDA3.3-4 (SEMTECH), FUSE F1250T (TELELINK), SIDACTOR- P1800SC (TECCOR)
MECHANICAL
Side View
Front View
Bottom View
Recommended PCB Layout
42.5 Max
5.0 IN 2
PLACES
2.54 PITCH
IN 7 PLACES
10.16
8.5 Max
1
6 7
8 9
11.0
13.0 MAX
SEATED HEIGHT
1
0.10 MAX
2
3 4
5
10 11
7.62
1.0
3.0
+/- 0.2
2.2
0.5
10.0
NOTE: ALL DIMENSIONS IN MM
©2003 Bel Fuse Inc. Specifications subject to change without notice. 05.20.03
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
Page 1