AP72250
0.6V TO 5.5V INPUT SYNCHRONOUS BOOST CONVERTER WITH 4.7A SWITCHES
Description
Pin Assignments
The AP72250 is a synchronous boost converter with a minimum 1V
input startup voltage and can operate in a wide input voltage range of
0.6V to 5.5V. The device fully integrates a 20mΩ high-side power
MOSFET and a 26mΩ low-side power MOSFET to provide high-
efficiency step-up DC-DC conversion.
(Top View)
1
2
3
4
FB
PG
EN
VOUT
SW
VOUT
SW
GND
MODE
VIN
A
B
C
The AP72250 device is easily used by minimizing the external
component count due to its adoption of peak current mode control,
allowing it to handle wide input-to-output ratios. It also achieves
outstanding performance in line and load transient responses and
seamless transitions between boost and pass-through modes.
PGND
PGND
The device is available in a small 1.75mm x 1.35mm, 12-ball WLCSP.
X1-WLB1713-12
Features
Applications
VIN: 0.6V to 5.5V
Low voltage power cells
Portable consumer devices
Minimum Input Startup Voltage: 1V
Output Voltage (VOUT): 1.7V to 5.5V
4.7A Switching Current
Supercapacitor charge storages
USB power supplies
0.8V ± 1% Reference Voltage
Power banks
20μA Low Quiescent Current (Pulse Frequency Modulation)
900kHz Switching Frequency
Industrial metering equipments
Up to 89% Efficiency at 5mA Light Load
Selectable Operation Mode
.
.
.
Pulse Frequency Modulation (PFM)
Ultrasonic Mode (USM)
Forced Pulse Width Modulation (FPWM)
Power-Good Indicator with 5MΩ Internal Pull-up Resistor
Protection Circuitry
.
.
.
.
.
Undervoltage Lockout (UVLO)
Peak Current Limit
Negative (Valley) Current Limit
Output Short Circuit Protection (SCP)
Thermal Shutdown
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/200, PPAP
capable, and manufactured in IATF 16949 certified facilities),
please contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 26
www.diodes.com
January 2022
© Diodes Incorporated
AP72250
Document number: DS44135 Rev. 1 - 2