AP66300
3.8V TO 60V INPUT, 3A LOW IQ SYNCHRONOUS BUCK CONVERTER
Description
Pin Assignments
The DIODES™ AP66300 is an adjustable switching frequency
internal compensated synchronous DC-DC buck converter with a
default internal frequency of 500kHz. The device fully integrates a
120mΩ high-side power MOSFET and a 55mΩ low-side power
MOSFET to provide high-efficiency step-down DC-DC conversion.
16
15
14
13
The AP66300 enables continuous load current of up to 3A with
efficiency as high as 95% in enhanced biased.
1
MSYNC
FS
BIAS
VCC
VIN
12
11
The AP66300 features current mode control operation, which
enables easy loop stabilization supporting wide range of output
capacitive loads.
2
3
4
10 EN
The AP66300 simplifies board layout and reduces space
requirements with its high level of integration and minimal need for
external components, making it ideal for distributed power
architectures.
EPAD
9
VIN
PGND
6
5
7
8
The AP66300 is available in a standard Green U-QFN4040-16/SWP
(Type UXB) package.
Features
Applications
VIN 3.8 to 60V
General purpose point-of-load DC/DC power conversions
Telecommunications
3A Continuous Output Current
VOUT Adjustable from 0.8V to 50V
Distributed power systems
Home audios
Enhanced Efficiency Mode with Bias
Adjustable Switching Frequency. 500kHz Default Frequency
Start-up with Pre-biased Output
Consumer electronics
Network systems
External Soft-Start with Tracking – Sequential, Ratiometric, or
Absolute. Default Internal Soft-Start of 2ms
Enable Pin with 5% tolerance
FPGA, DSP and ASIC supplies
Green electronics
Soft Discharge
±5% Power Good Detection with Internal Pull-up Resistor
Overvoltage Protection & Undervoltage Protection
Overcurrent Protection (OCP) with Hiccup
Thermal Protection
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP
capable, and manufactured in IATF 16949 certified
facilities), please contact us or your local Diodes
representative.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 25
www.diodes.com
August 2022
© 2022 Copyright Diodes Incorporated. All Rights Reserved.
AP66300
Document number: DS43722 Rev. 2 - 2