AP66200Q
3.8V TO 60V INPUT AUTOMOTIVE GRADE, 2A LOW IQ SYNCHRONOUS BUCK CONVERTER
Description
Pin Assignments
The DIODES™ AP66200Q is an adjustable switching frequency,
internally compensated, synchronous DC-DC buck converter with a
default internal frequency of 500kHz. The device fully integrates a
185mΩ high-side power MOSFET and an 80mΩ low-side power
MOSFET to provide highly efficient step-down DC-DC conversion.
16
15
14
13
1
BIAS
VCC
VIN
MSYNC
FS
12
11
The AP66200Q enables a continuous load current of up to 2A with as
high as 95% efficiency. The device features current mode control
operation, enabling easy loop stabilization, and supports a wide range
of output capacitive loads.
2
3
4
10 EN
EPAD
With its high level of integration and minimal need for external
components, the AP66200Q simplifies board layout and reduces
space requirements. This makes it ideal for distributed power
architectures.
9
VIN
PGND
6
5
7
8
The AP66200Q is available in the standard Green U-QFN4040-
16/SWP (Type UXB) package.
Features
Applications
Qualified for Automotive Applications
General-purpose point-of-load DC/DC power conversion
Automotive infotainments
Telecommunication systems
Distributed power systems
Home audio devices
AEC-Q100 Qualified with the Following Results
.
.
.
Device Temperature Grade 1: -40°C to +125°C TA
Device HBM ESD Classification Level H1C
Device CDM ESD Classification Level C3B
VIN 3.8V to 60V
Consumer electronics
2A Continuous Output Current
Network systems
VOUT Adjustable from 0.8V to 50V
FPGA, DSP, and ASIC supplies
Green electronics
Enhanced Efficiency Mode with Bias
Adjustable Switching Frequency. 500kHz Default Frequency
Start-Up with Pre-Biased Output
External Soft-Start with Tracking – Sequential, Ratiometric, or
Absolute. Default Internal Soft-Start of 1.7ms
Enable Pin with 5% tolerance
Soft Discharge
±5% Power Good Detection with Internal Pull-Up Resistor
Overcurrent Protection (OCP) with Hiccup
Thermal Protection
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The AP66200Q is suitable for automotive applications
requiring specific change control; this part is AEC-Q100
qualified, PPAP capable, and manufactured in IATF 16949
certified facilities.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 25
www.diodes.com
December 2022
© 2022 Copyright Diodes Incorporated. All Rights Reserved.
AP66200Q
Document number: DS43721 Rev. 1 - 2