深圳市国盛电子商行
0755-83550077
AP5668
AUDIO PRODUCT
3-CH Stereo 2.6W Audio Amplifier with DC_Volume Control
Features
General Description
z
z
Low Operation Current with 7mA
AP5668 is a monolithic integrated circuit, which
provides precise DC volume control, and a stereo
bridged 3 channel audio power amplifiers capable
of producing 2.6W into 4Ω with less than 10%
THD+N. The attenuator range of the volume in
AP5668 is from 20dB (DC_Vol=0V) to -80dB
(DC_Vol=3.60V) with 32 steps. The advantage of
internal gain setting can be less components and
PCB area. Both of the de-pop circuitry and the
thermal shutdown protection circuitry are
integrated in AP5668, that reduce pops and clicks
noise during power up or shutdown mode
operation. It also improves the power off pop noise
and protects the chip from being destroyed by
over temperature and short current failure.
The AP5668 uses advanced 1-wire control mode
to complete the channel select and shutdown
function.
Improved De-pop Circuitry to Eliminate
Turn-on and Turn-Off Transients in Outputs
32 Steps Volume Adjustable by DC Voltage
with Hysteresis
z
z
z
High S/N Ratio
2.6W per Channel Output Power into 4Ω Load
at 5V, BTL Mode
z
z
Two output modes allowable with BTL and
SE Modes Selected by HP-IN
Low Current Consumption in Shutdown Mode
(1uA)
z
z
z
Low THD+N and Low Noise
Maximum Output Swing Clamping Function
Thermal Shutdown Protection and Over
Current Protection Circuitry
z
Available in QFN4x4-20L and TSSOP20
Packages
To simplify the audio system design, AP5668
combines a stereo bridge-tied loads (BTL) mode
for speaker drive and a stereo single-end (SE)
mode for headphone drive into a single chip,
where both modes are easily switched by the
HP-IN input control pin signal.
Application
z
z
z
Portable-DVD
LCD Monitor or TVs
Audio Equipments
AP5668 is available in QFN4x4-20L andTSSOP20
package.
Ordering and Marking Information
Part ID
Package
TSSOP20
QFN4x4-20L
Packing
AP5668
AP5668
3000PCS / Reel Tape
3000PCS / Reel Tape
AP5668
XXXXXXX
Chip Marking:
XXXXXXX- Date Code
Note: AP5668 lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination
finish; which are fully compliant with RoHS.
SHENZHEN GUOSHENG ELECTRONIC BUSINESS
TEL:0755-83550077 13728872886
Version: 1.1
1 / 9