AP22953
SWITCH FOR VBUS LINE WITH OVERVOLTAGE, SURGE, AND ESD PROTECTION
Description
Pin Assignments
The AP22953 device is a single-chip solution for USB 2.0/3.0/Type-C
connector VBUS line protection. The bidirectional MOSFET switch
ensures normal current flow in both charging and host mode while
protecting the internal circuits from overvoltage conditions at the
VBUS_CON pin. On the VBUS_CON pin, the device has overvoltage
protection up to 30V. After the #EN pin is pulled low, the AP22953
counts 20ms before turning on the MOSFET via soft-start delay. The
#ACK pin indicates the MOSFET is fully turned ON.
AP22953
The typical application interface for the AP22953 is the VBUS line in
USB connectors. Typical end equipment for the AP22953 include
smartphones, tablet PCs, wearables, and electronic-point-of-sale
(EPOS) systems. The AP22953 can also be used with other devices
that use a 5V power rail interface.
1
2
3
4
VBUS_
VBUS_
GND
GND
A
SYS
SYS
Overtemperature protection turns off the switch at 145°C (typical).
The AP22953 is available in the wafer level chip scale W-WLB2013-
12 1.988mm x 1.288mm x 0.64mm package with backside laminate.
VBUS_
VBUS_
GND
GND
#ACK
#EN
B
C
CON
SYS
VBUS_
VBUS_
CON
CON
WL-CSP (Top View)
Applications
Features
Smartphones
Tablet PCs
Wearables
Surge protection
IEC61000-4-5 >100V
.
Integrated 39mΩ (typ) N-Channel MOSFET Switch
Overvoltage Protection (OVP) at VBUS_CON Up to 30VDC
Integrated Input Enable and Status Output Signal
Overtemperature Protection (OTP)
Electronic-Point-of-Sale (EPOS) Systems
ESD Protection
.
Human Body Model >4kV
.
.
.
Charged Device Model >1kV
IEC61000-4-2 Air Discharge >15kV
IEC61000-4-2 Contact Discharge >15kV
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/200, PPAP
capable, and manufactured in IATF 16949 certified
facilities), please contact us or your local Diodes
representative.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 12
www.diodes.com
January 2022
© Diodes Incorporated
AP22953
Document number: DS42795 Rev. 1 - 2