AP22850
10V SINGLE CHANNEL PROGRAMMABLE LOAD SWITCH
Description
Pin Assignments
AP22850 is an integrated P-Channel load switch, which features an
adjustable ramp-up and discharge rate that can be set via an external
capacitor and a resistor, respectively. In addition, it incorporates a
“power good” output to flag when the switch is fully enhanced. The P-
Channel switch has a typical RDS(ON) of 21mΩ, enabling a current
handling capability of up to 8A.
Top View
Bottom View
SS
1
2
3
4
8
7
6
5
8
7
6
5
1
2
3
4
SS
EN
DIS
PG
EN
VIN
VIN
VOUT
VOUT
VIN
VIN
VBIAS
GND
AP22850 is designed to operate from 4.5V to 11V. The near-zero
quiescent supply current makes it ideal for use in battery powered
distribution systems where power consumption is a concern.
W-DFN2020-8
Even as a P-Channel load switch, AP22850 does not require an
external gate pull-up resistor, and consequently, stays true to its
headlining feature of near-zero quiescent current specification. It also
features circuitry to suppress fast input transients (with EN low) from
coupling to VOUT.
Applications
Feature
Integrated Load Switches in Ultrabook PCs
Power Up/Down Sequencing in Ultrabook PCs
Tablets
Near-Zero Quiescent Current
No External Gate Pull-Up Resistor Required
Suppresses Fast Transients on VIN
Notebooks / Netbooks
E-Readers
4.5V to 11V Input Voltage Range
Low Typical RDS(ON) of 21mΩ
Consumer Electronics
Set-Top Boxes
Adjustable Start-Up and Discharge Rate
Small Form Factor Package W-DFN2020-8
– Footprint of just 4mm2
Industrial Systems
Telecom Systems
Thermally Efficient Package with an Exposed Pad
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Lead-Free Plating (NiPdAu Finish over Copper Leadframe).
e4
Terminals: Solderable per MIL-STD-202, Method 208
Weight: TBD grams (Approximate)
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 14
www.diodes.com
March 2015
© Diodes Incorporated
AP22850
Document number: DS36540 Rev. 2 - 2