CONFIDENTIAL
[AP2061]
= Preliminary=
AP2061
ASAHI KASEI MICRODEVICES
2.0A Highꢀside LED Driver for Camera Flash with I2C
GENERAL DESCRIPTION
The AP2061 is a white LED driver IC for camera flash applications in portable equipments. The device
integrates a current mode synchronous boost DC/DC converter and maximum 2A current sources. The
internal boost DC/DC converter integrates a switching FET and synchronous rectifier, and supports a
small size multilayer inductor with 4MHz switching frequency. The internal current sources allow for
grounded cathode connections for easier heat dissipation and simple LED arrangement. AP2061
includes eight protections that are LED thermal detection, inductor current limitation, input voltage
detection, over voltage protection, under voltage lock out, device thermal protection, LED open/short
protection and output-ground short protection to avoid significant system problems. Flash current, torch
current, inductor limit current and flash on-time is programmable through I2C interface. The device uses
a small size package (CSP: 1.6mm x 1.6mm, 0.4mm pitch, 16pins) to utilize less board space.
FEATURE
ꢀ Power Supply Voltage: 2.7V~5.5V
ꢀ LED Current: max 2.0A, total (max 1A/ch)
ꢀ HighꢀSide current source
ꢀ Switching Frequency: 4.0 MHz
ꢀ Automatically select working mode (DC/DCꢁBypass)
ꢀ Synchronized with RF powerꢀAmplifier pulse
ꢀ I2C Function:
ꢀ Flash LED current setting
ꢀ Torch LED current setting
ꢀ Flashing onꢀtime setting
ꢀ Current limit value setting
ꢀ LED thermal detection voltage setting
ꢀ Battery detection voltage setting
ꢀ Error read support
ꢀ Protection Function:
ꢀ LED thermal detection
ꢀ Inductor current limit
ꢀ Battery voltage detection
ꢀ Over voltage protection (OVP)
ꢀ Under voltage lock out (UVLO)
ꢀ Thermal shutdown
ꢀ LED open/short
ꢀ Outputꢀground short
ꢀ Ta: ꢀ30 ~ 85°C
ꢀ Package: 16 pins CSP (1.6 x 1.6mm, 0.4mm pitch)
Rev.0.1
ꢀ 1 ꢀ
2012/10