AP2004
PWM BUCK CONTROLLER
General Description
Features
The AP2004 integrates Pulse-Width-Modulation (PWM) control
circuit into a single chip, mainly designs for power-supply
regulator. All the functions include an on-chip 1.25V reference
output, an error amplifier, an adjustable oscillator, a soft-start,
UVLO, SCP circuitry, and a push-pull output circuit. Switching
frequency is adjustable by trimming CT. During low VCC situation,
the UVLO makes sure that the outputs are off until the internal
circuit operates normally.
•
•
•
•
•
•
•
•
•
PWM Buck Control Circuitry
Operating voltage can be up to 27V
Under voltage Lockout (UVLO) Protection
Short Circuit Protection (SCP)
Soft-start circuit
Variable Oscillator Frequency -- 300Khz Max
1.25V voltage reference Output
8-pin SOP package
Lead Free Finish/ RoHS Compliant for Lead Free and
“Green” products (Note 1)
•
SOP-8L: Available in “Green” Molding Compound (No
Br, Sb)
Applications
•
•
•
•
Backlight inverter
LCD Monitor
CDROM, XDSL Product
DC/DC converters in computers, etc.
Ordering Information
X X X
AP 2004
Lead-Free
Packing
Package
S: SOP-8L
L : Lead Free
G : Green
-U : Tube
-13 : Taping
Tube
Part Number
13” Tape and Reel
Device
(Note 2)
Package
Code
Packaging
Quantity
Quantity
Part Number
Suffix
Suffix
-13
AP2004S
S
SOP-8L
100
- U
2500/Tape & Reel
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP2004 Rev. 2
1 of 8
www.diodes.com
DECEMBER 2006
© Diodes Incorporated