AP1534
PWM CONTROL 2A STEP-DOWN CONVERTER
General Description
Features
AP1534 consists of step-down switching regulator with PWM
control. These devices include a reference voltage source,
oscillation circuit, error amplifier, internal PMOS.
•
•
•
•
•
•
•
•
Input voltage: 4.4V to 18V
Output voltage: 0.8V to VCC
Duty ratio: 0% to 99% PWM control
Oscillation frequency: 300KHz typ.
Current limit, Enable function
.
AP1534 provides low-ripple power, high efficiency, and excellent
transient characteristics. The PWM control circuit is able to vary
the duty ratio linearly from 0 up to 99%. This converter also
contains an error amplifier circuit as well as a soft-start circuit that
prevents overshoot at startup. An enable function, an over
current protect function and a short circuit protect function are built
inside, and when OCP or SCP happens, the operation frequency
will be reduced from 300KHz to 50KHz. Also, an internal
compensation block is built in to minimize external component
count.
Thermal Shutdown function
Built-in internal SW P-channel MOS
SOP-8L: Available in “Green” Molding Compound
(no Br, Sb)
•
Lead Free Finish/RoHS Compliant (Note 1)
With the addition of an internal P-channel Power MOS, a coil,
capacitors, and a diode connected externally, these ICs can
function as step-down switching regulators. They serve as ideal
power supply units for portable devices when coupled with the
SOP-8L mini-packages, providing such outstanding features as
low current consumption. Since this converter can accommodate
an input voltage up to 18V, it is also suitable for the operation via
an AC adapter.
Applications
•
•
•
•
•
•
•
•
PC Motherboard
LCD Monitor
Graphic Card
DVD-Video Player
Telecom Equipment
ADSL Modem
Printer and other Peripheral Equipment
Microprocessor Core Supply
Ordering Information
X X X
A P 1 5 3 4
Package
S : SOP-8L
Lead Free
G : Green
Packing
-U : Tube
-13 : Tape & Reel
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Tube
Part Number
13” Tape and Reel
Package Packaging
Device
Part Number
Suffix
Quantity
Quantity
Code
(Note 2)
Suffix
AP1534S
100
-U
2500/Tape & Reel
-13
S
SOP-8L
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AP1534 Rev. 2
1 of 8
DECEMBER 2007
www.diodes.com
© Diodes Incorporated