AOZ1231-01
28V/4A Synchronous EZBuckTM Regulator
General Description
Features
The AOZ1231-01 is high-efficiency, easy-to-use DC/DC
synchronous buck regulator that operates up to 28V.
The device is capable of supplying 4A of continuous
output current with an output voltage adjustable down to
0.8V (±1.0%).
Wide input voltage range:
– 4.5V to 28V (internal V
)
CC
– 2.7V to 28V (external V
)
CC
4A continuous output current
Output voltage adjustable to 0.8V (±1.0%)
The AOZ1231-01 integrates an internal linear regulator
Low R
internal NFETs
DS(ON)
to generate 5.3V V from the input source. If the input
CC
voltage is lower than 5.3V, the linear regulator operates
– 40m high-side
in low drop-output mode and the V voltage is equal to
CC
– 25m low-side
input voltage minus the drop-output voltage of the
internal linear regulator.
Constant On-time with input feed-forward
Programmable frequency up to 1MHz
Internal 5.3V, 20mA linear regulator
Ceramic capacitor stable
A proprietary constant on-time PWM control with input
feed-forward results in ultra-fast transient response while
maintaining relatively constant switching frequency over
the entire input voltage range. The switching frequency
can be externally set up to 1MHz.
Adjustable soft start
Power Good output
Over voltage protection
The devices feature multiple protection functions such
Integrated bootstrap diode
Cycle-by-cycle current limit
Short-circuit protection
as V under-voltage lockout, cycle-by-current limit,
CC
output over-voltage protection, short-circuit protection,
and thermal shutdown.
Thermal shutdown
The AOZ1231-01 is available in a 5mm × 5mm
QFN-30L package and is rated over a -40°C to +85°C
ambient temperature range.
Thermally enhanced 5mm × 5mm QFN-30L package
Applications
Portable computers
Compact desktop PCs
Servers
Graphics cards
Set top boxes
LCD TVs
Cable modems
Point of load DC/DC converters
Telecom/Networking/Datacom equipment
Rev. 1.1 June 2012
www.aosmd.com
Page 1 of 17