ANX7530
Product Brief
SlimPort® (4K Ultra-HD) Receiver
ANX7530 is a low-power 4K Ultra-HD (4096x2160p60) mobile HD receiver targeted primarily for Virtual Reality (VR)
headsets. With a 4-lane DisplayPort1.4 input and dual MIPI outputs, ANX7530’s feature set is optimized to meet the high
performance requirements for current and next generation Head-Mounted Displays (HMD) for Augmented Reality (AR) and
Virtual Reality. Moreover, with data rate support of up to 6.75Gbps on its DisplayPort input, ANX7530 is an ideal
companion device for SlimPort transmitters currently implemented in many leading smart phones.
ꢀ
Two MIPI DSI transmitter interface outputs
Features
−
−
−
−
Two MIPI ports per display output
Display synchronization
ꢀ
Standard compliance
−
−
DisplayPort1.4, HDCP2.2/1.4
MIPI-DSI 1.2 and D-PHY 1.1
8-MIPI lanes total per MIPI interface output
MIPI-DSI data rates up to 1.5 Gbps per lane
ꢀ
DisplayPort Receiver
ꢀ
ꢀ
ꢀ
System operation and power supply
−
−
DisplayPort1.4 receiver
−
−
Slave I2C interface
1.0V and 1.8V
Configurable 1, 2 or 4-lane input supports:
HBR2.5 (6.75Gbps), HBR2 (5.4Gbps), HBR
(2.7Gbps), and RBR (1.62Gbps) data rates
Horizontal left / right line splitting
3D stereo modes
I2S Stereo Audio Output
−
−
−
−
−
2-channels, 192Khz sample rate
Up to 8-channels TDM
HDCP2.2 and HDCP1.4 support
Package:
ꢀ
Resolution
DisplayPort Receiver Input Bandwidth supports
up to 4K x 2K x 60Hz
−
−
ANX7530BH: 100-pin BGA, 5mm x 5mm
−
ANX7530VH: 169-pin BGA, 8mm x 8mm
DisplayPort Receiver
MIPI Output 0
Video
Video
FIFO
MIPI_0 Port 0
Link
PHY
Stream 0
MIPI_0 Port 1
Sync
DP_RX0 (p/n)
DP_RX1 (p/n)
DP_RX2 (p/n)
DP_RX3 (p/n)
Line
Buffer
MIPI_1 Port 0
MIPI_1 Port 1
PHY
Link
Video
Video
FIFO
Link
PHY
Stream 1
MIPI Output 1
SCLK
WS
Audio
Audio
FIFO
I2S
Stream
SD0, SD1
HDCP 1.4
I2C Slave
HDCP 2.2
OSC
Audio
PLL
SCL/SDA
MCU
AUX (p/n)
RST_N
AUX, HPD, Config & Control Logic
ANX7530
AA-004263-PB-7
May 2018