Model PD0810J5050S2
Rev C
Ultra Low Profile 0805 Power Divider
50Ω to 50Ω
Description
The PD0810J5050S2 is a low profile, sub-miniature Wilkinson power divider in an
easy to use surface mount package. The PD0810J5050S2 is ideal for high volume
manufacturing and delivers higher performances than traditional printed and lumped
element solutions. The PD0810J5050S2 is matched to 50 Ω and has a height
profile of 0.5 mm which is ideal for high level integrations in the following markets:
GSM, WCDMA, Home Cordless, and RFID. The PD0810J5050S2 does not include
the resistive element and therefore, requires an external resistor for operation. The
PD0810J5050S2 is available on tape and reel for high volume manufacturing pick
and place.
Detailed Electrical Specifications: Specifications subject to change without notice.
ROOM (25°C)
Features:
Parameter
Min.
Typ.
Max
Unit
MHz
Ω
• 800-1000 MHz
Frequency
800
1000
• 21 dB Isolation (output ports)
• 0.5mm Height Profile
• 50ꢀ Input / 50ꢀ Outputs
• Low Insertion Loss
• Surface Mountable
• Tape & Reel
• Non-conductive Surface
• RoHS Compliant
• External Resistor required
Input Port Impedance
Output Port Impedance
Return Loss
50
50
19
0.5
0.3
1
Ω
14
dB
Insertion Loss*
0.6
0.8
4
dB
Amplitude Balance
Phase Balance
dB
Degrees
dB
Isolation (Output Ports)
Power Handling
Operating Temperature
17
21
2
Watts
ºC
-55
+85
* Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC)
Outline Drawing
Top View (Near-side)
Side View
Bottom View (Far-side)
.079±.004
[2.00±0.10]
2X .026
[0.65]
.021±.002
[0.53±0.05]
1
2
3
4
.039
[0.98]
6X .009
[0.22]
.049±.004
[1.25±0.10]
Orientation
Marker Denotes
Pin Location
6
5
Orientation
Marker Denotes
Pin Location
6X .012
[0.30]
Pin Designation
1
2
3
4
5
6
GND
Input
GND
Output 1
GND
Dimensions are in Inches [Millimeters]
Mechanical Outline
Tolerances are Non-Cumulative
Output 2
USA/Canada:
Toll Free:
(315) 432-8909
(800) 411-6596
+44 2392-232392
Available on Tape
and Reel for Pick and
Place Manufacturing.
Europe: