Model I100N50X4B
Half Flange Termination
100 Watts, 50
Description
The I100N50X4B is high performance Aluminum Nitride (AlN) half flange
termination intended as a cost competitive alternative to Beryllium Oxide
(BeO). The termination is well suited to all cellular frequency bands such
as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high power handling
makes the part ideal for terminating circulators, and for use in power
combiners. The termination is also RoHS compliant!
General Specifications
Resistive Element
Substrate
Thick Film
AlN Ceramic
Mounting Flange
Operating Temperature
Copper, nickel plated per QC-N-290
Features:
-55°C to +150°C (see de rating chart)
Tolerance is 0.010”, unless otherwise specified. Designed to meet or exceed
applicable portions of MIL-E-5400. All dimensions in inches.
RoHS Compliant
100 Watts
Electrical Specifications
DC – 4.0 GHz
AlN Ceramic
Resistance Value:
Power:
50 Ohms, 2%
100 Watts
Frequency Range:
DC – 4.0 GHz
Non-Nichrome Resistive
> 26 dB to 1.3 GHz
> 22 dB to 4.0GHz
Element
Return Loss
Specification based on unit properly installed using suggested mounting instructions
and a 50 ohm nominal impedance. Specifications subject to change with out notice.
Low VSWR
100% Tested
Outline Drawing
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
LEAD LENGTH: 0.150” MIN
1 of 2
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Europe: