ICs for Compact Disc/CD-ROM Player
AN8783SB
4-channel linear driver IC for CD/CD-ROM drive
■ Overview
The AN8783SB employs one channel of power
op-amp. system and three channels of H-bridge
Unit: mm
18.4±0.2
(5.15)
(4.8)
28
22
21
15
system. Two channels out of three channels of H-
bridge method are a current feedback system. So
this IC is optimum for driving an actuator and a
motor of CD/CD-ROM drive. It comes with a
surface mount package which excels in a heat ra-
diation characteristic.
(1.315)
0° to 10°
0.65±0.20
1
7
8
14
■ Features
• Little phase delay due to current feedback system
(2-channel for actuator)
• 4 modes of forward, reverse rotations, braking and
standby can be selected from channels for load-
ing motor (H-bridge method) by a digital signal
from a microcomputer.
+0.10
0.35
–0.05
(1.2)
(6.4)
0.8
Seating plane
HSOP042-P-0400
• Wide output dynamic range regardless of refer-
ence voltage of the system
• Setting the input level of a driver by an external
resistor is possible.
• PC (power cut) function built-in (common for ch.
1, ch. 3 and ch. 4)
• Thermal shut-down circuit built-in (with hyster-
esis)
■ Applications
• CD/CD-ROM drive
1