Application Note
AN3012
Electrical Characterization of MAAMSS0031
CATV Amplifier at +5 Volts and Reduced Gain
Rev. V2
Abstract
Functional Schematic
GND
The MAAMSS0031 CATV amplifier is a GaAs MMIC
which exhibits low noise and high linearity. It is
ideally suited for set top boxes, home gateways, and
other broadband internet based appliances.
This amplifier is a monolithic single stage design in
a 75 ohm input/output impedance environment. It is
designed to have a reduced number of external
matching components. The MAAMSS0031 can also
be used for +8 volt operation as shown in the
datasheet.
Pin 1
Introduction
The purpose of this application note is to present the
typical performance of the MAAMSS0031 amplifier
when it is operated at +5 volts. It is intended as an
aid to engineers for the implementation of the
MAAMSS0031 in set top box applications at 5 volts.
An enhanced return loss circuit similar to that shown
on page 4 of the data sheet is used for the small
signal measurements.
RFOUT
RFIN GND
Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +5 Volts, Z0 = 75 Ohms
Parameter
Gain
Test Conditions
Units
dB
Min.
—
Typ.
9.7
0.5
2.7
8
Max.
—
Gain Flatness
dB
—
—
Noise Figure
dB
—
—
Input Return Loss
Output Return Loss
Output IP3
dB
—
—
dB
—
9
—
6 MHz Spacing, -10 dBm output per tone
132 channels, +23 dBmV/channel at the output.
132 channels, +23 dBmV/channel at the output.
dBm
dBc
dBc
dBm
mA
—
29
—
Composite Triple Beat, CTB
Composite Second Order, CSO
P1dB
—
-75
-66
18
—
—
—
—
—
IDD
+ 5 Volts
—
100
—
1
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.