Data Sheet
AS1108
4-Digit LED Display Driver
1 General Description
2 Key Features
ꢀ 10MHz SPI-, QSPI-, Microwire-Compatible
The AS1108 is a compact display driver for 7-segment
numeric displays of up to 4 digits. The device can be
programmed via SPI, QSPI, and Microwire as well as a
conventional 4-wire serial interface.
Serial I/O
ꢀ Individual LED Segment Control
ꢀ Segment Blinking Control (can be synchronized
across multiple drivers)
The device includes an integrated BCD code-B/HEX
decoder, multiplex scan circuitry, segment and display
drivers, and a 32-bit memory. Internal memory stores
the LED settings, eliminating the need for continuous
device reprogramming.
ꢀ Hexadecimal- or BCD-Code/No-Decode
Digit Selection
ꢀ 3µA Low-Power Shutdown Current (typ;
data retained)
ꢀ Extremely Low Operating Current 0.5mA in
Every segment can be individually addressed and
updated separately. Only one external resistor (RSET) is
required to set the current through the LED display. LED
brightness can be controlled by analog or digital means.
The device can be programmed to use the internal
code-B/HEX decoder to display numeric digits or to
directly address each segment.
Open-Loop
ꢀ Digital and Analog Brightness Control
ꢀ Display Blanked on Power-Up
ꢀ Drive Common-Cathode LED Displays
ꢀ Supply Voltage Range: +2.7 to +5.5V
ꢀ Software Reset
The AS1108 features an extremely low shutdown cur-
rent of typically 3µA, and an operational current of less
than 500µA. The number of digits can be programmed,
the device can be reset by software, and an external
clock is also supported. Additionally, segment blinking
can be synchronized across multiple drivers.
ꢀ Optional External Clock
ꢀ Packages:
- 20-pin DIP
- 20-pin SOIC
The AS1108 provides several test modes for easy appli-
cation debugging.
3 Applications
The AS1108 is ideal for bar-graph displays, instrument-
panel meters, LED matrix displays, dot matrix displays,
set-top boxes, white goods, professional audio equip-
ment, medical equipment, industrial controllers and
panel meters.
The device is available in a 20-pin DIP and a 20-pin
SOIC package.
Figure 1. Typical Application Diagram
+5V
VDD
9.53kΩ
4 Digits
ISET
DIG0 to
DIG3
DIN
I/O
8 Segments
LOAD/CSN
I/O
AS1108
CLK
SCK
SEG A to G
SEP DP
GND
Micro-
processor
GND
4-Digit Microprocessor Display
www.austriamicrosystems.com
Revision 2.11
1 - 19