PRELIMINARY
AmMCL00XA
2 or 4 Megabyte 3.0 Volt-only Flash Miniature Card
DISTINCTIVE CHARACTERISTICS
■ 2 or 4 Mbytes of addressable Flash memory
■ 2.7 V to 3.6 V, single power supply operation
— Write and read voltage: 3.0 V –10/+20%
■ Available in industrial temperature grade
(–40°C to +85°C)
■ Miniature Card standard form factor
— True interchangeability
— No additional supply current required for VPP
— 60-pad elastomeric connector
— Supports multiple technologies
— Sonic welded stainless steel case
— PCMCIA Type II adapter available
— Selectable byte- or word-wide configuration
— Small Form Factor (38 mm x 33 mm x 3.5 mm)
■ Fast access time
— 150 ns maximum access time
■ CMOS low power consumption
— Typical active read current:
35 mA (word mode)
— Typical active erase/write current:
40 mA (word mode)
■ 60 connection bus
— 16-bit data bus
— Typical standby current:
10 µA (4 Mbyte); 5 µA (2 Mbyte)
— 25-bit address bus
— Easy system integration
— Low cost implementation
— Low cost cards
■ High write endurance
— Guaranteed minimum 100,000 write/erase
cycles per card
— More than 1,000,000 cycles per card typical
■ Consumer-friendly mechanicals
■ Uniform sector architecture
— User can easily insert and remove card, upgrade
memory, and add applications
— 64K byte individually useable sectors
— Erase Suspend/Resume increases system level
performance
■ Voltage level keying
— Does not allow a 3 V card to plug into a 5 V
system and vice versa
— BUSY# and RESET# signals
— Single power supply design
■ Zero data retention power
— System does not need a separate program
voltage supply; only one is necessary to read
and write
— No power required to retain data
Memory device, ensuring high reliability and excellent
performance. The Miniature Card is less than 30% of
the size of a PCMCIA memory card. Applications
include digital voice recorders, pocket PCs and intelli-
gent organizers, smart cellular telephones, voice and
data messaging pagers, digital still cameras and por-
table instrumentation equipment.
GENERAL DESCRIPTION
The Miniature Card is an expansion card that pro-
vides a low cost, low power, high-performance, small
form factor solution for data and file storage to the
portable, handheld market, which includes audio,
digital film, wireless, and PDA (Portable Digital
Assistant) applications.
The Miniature Card specification will be defined by
PCMCIA as of October 1997. The participating associ-
ation members include major Flash memory vendors
and leading consumer electronics OEMs. The goal of
the Miniature Card specification is to promote an open,
Miniature cards can be easily “snapped” into the back
of an electronic system and can be readily removed
and replaced by end users. AMD’s 3 V Flash Miniature
Cards are manufactured using AMD’s industry leading
3.0 volt-only, single-power-supply Am29LV081 Flash
This document contains information on a product under development at Advanced Micro Devices. The information
is intended to help you evaluate this product. AMD reserves the right to change or discontinue work on this proposed
product without notice.
Publication# 21138 Rev: E Amendment/0
Issue Date: September 1997
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
