AMIS-30532
Micro-Stepping Motor
Driver
Introduction
The AMIS−30532 is a micro−stepping stepper motor driver for
bipolar stepper motors. The chip is connected through I/O pins and an
SPI interface with an external microcontroller. It has an on−chip
voltage regulator, reset−output and watchdog reset, able to supply
peripheral devices. The AMIS−30532 contains a current−translation
table and takes the next micro−step depending on the clock signal on
the “NXT” input pin and the status of the “DIR” (=direction) register
or input pin. The chip provides a so−called “speed and load angle”
output. This allows the creation of stall detection algorithms and
control loops based on load−angle to adjust torque and speed. It is
using a proprietary PWM algorithm for reliable current control.
The AMIS−30532 is implemented in I2T100 technology, enabling
both high−voltage analog circuitry and digital functionality on the
same chip. The chip is fully compatible with the automotive voltage
requirements.
http://onsemi.com
NQFP−32, 7x7
CASE 560AA
MARKING DIAGRAM
The AMIS−30532 is ideally suited for general−purpose stepper
motor applications in the automotive, industrial, medical, and marine
environment. With the on−chip voltage regulator it further reduces the
BOM for mechatronic stepper applications.
Key Features
• Dual H−Bridge for 2−Phase Stepper Motors
†
• Programmable Peak−Current up to 1.6 A Continuous (3.0 A Short
Time) using a 5−bit Current DAC
• On−Chip Current Translator
• SPI Interface
• Speed and Load Angle Output
• Seven Step Modes from Full−Step Up to 32 Micro−Steps
• Fully Integrated Current−Sense
C532−001 = Specific Device Code
XXXX
Y
= Date Code
= Assembly Location
= Traceability Code
ZZ
• PWM Current Control with Automatic Selection of Fast and Slow
Decay
• Low EMC PWM with Selectable Voltage Slopes
• Active Fly−Back Diodes
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 27 of this data sheet.
• Full Output Protection and Diagnosis
• Thermal Warning and Shutdown
• Compatible with 5 V and 3.3 V Microcontrollers
• Integrated 5 V Regulator to Supply External Microcontroller
• Integrated Reset Function to Reset External Microcontroller
• Integrated Watchdog Function
• These Devices are Pb−Free and are RoHS Compliant*
†Output current level may be limited by ambient temperature and heat sinking.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2012
1
Publication Order Number:
August, 2012 − Rev. 1
AMIS−30532/D