5秒后页面跳转
AMIS-710239-A3 PDF预览

AMIS-710239-A3

更新时间: 2024-02-03 02:18:13
品牌 Logo 应用领域
AMI 传感器换能器图像传感器
页数 文件大小 规格书
7页 288K
描述
200dpi CIS Module

AMIS-710239-A3 技术参数

生命周期:TransferredReach Compliance Code:compliant
风险等级:5.76Base Number Matches:1

AMIS-710239-A3 数据手册

 浏览型号AMIS-710239-A3的Datasheet PDF文件第2页浏览型号AMIS-710239-A3的Datasheet PDF文件第3页浏览型号AMIS-710239-A3的Datasheet PDF文件第4页浏览型号AMIS-710239-A3的Datasheet PDF文件第5页浏览型号AMIS-710239-A3的Datasheet PDF文件第6页浏览型号AMIS-710239-A3的Datasheet PDF文件第7页 
AMIS-710239-A3: 200dpi CIS Module  
Data Sheet  
1.0 General Description  
The AMIS-710239-A3 (PI239MC-A3-R) is a contact image sensor (CIS) module. It is a long contact image sensor, which uses MOS  
image sensor technology for high speed performance. The AMIS-710239-A3 is suitable for scanning A3 size (307mm) documents with  
eight dots per millimeter (dpm) resolution. Hence, there are 38 AMIS-720233 (PI3033B) image sensors in the module, providing a total  
of 2432 pixels in a sequence. The sensors are 200 dots per inch (dpi) solid-state line imaging array, also a product of AMI  
Semiconductor. Applications include document scanners, mark readers and other office automation equipment.  
2.0 Key Features  
Light source, lens and sensor are integrated into a single module  
8dpm resolution, 307mm scanning read length  
High speed page scan - up to 490µsec/line @ 5MHz pixel rate  
Wide dynamic range  
One analog output  
Super super Red (630nm) LED light source  
Compact size 20.5mm x 21.5mm x 324mm  
Low power  
Light weight  
3.0 Functional Description  
The AMIS-710239-A3 imaging array consists of 38 sensor chips in the module, which are sequentially cascaded to provide 2432 photo-  
detectors with their associated multiplex switches and a digital shift register, which controls its sequential readout. Mounted in the  
module is a one-to-one graded indexed micro lens array, which focuses the scanned documents to image onto its sensing plane. The  
on-board amplifier processes the video signal to produce a sequential stream of video at the video output pin.  
Illumination is accomplished by means of an integrated LED light source. All components are housed in a small plastic housing which  
has a cover glass acting as the focal point for the object being scanned and protects the imaging array, micro lens assembly and LED  
light source from dust. I/O to the module is the 10-pin connector, located on one end of the module. The cross section of the AMIS-  
710239-A3 is shown in Figure 1 and the block diagram in Figure 2.  
AMI Semiconductor – Aug. 06, M-20610-001  
1
www.amis.com  

与AMIS-710239-A3相关器件

型号 品牌 描述 获取价格 数据表
AMIS-710240 AMI 200dpi CIS Module

获取价格

AMIS-710249 AMI 200dpi CIS Module with Reflector

获取价格

AMIS-710249-A6 ONSEMI AMIS-710249-A6

获取价格

AMIS-710250 AMI 200dpi CIS Module

获取价格

AMIS-710251 AMI 200dpi CIS Module

获取价格

AMIS-710251-A6 AMI Image Sensor,

获取价格