5秒后页面跳转
0ICAA-001-XTP PDF预览

0ICAA-001-XTP

更新时间: 2024-01-16 11:49:25
品牌 Logo 应用领域
AMI 网络接口电信集成电路电信电路光电二极管
页数 文件大小 规格书
12页 695K
描述
High-Speed Low Power CAN Transceiver

0ICAA-001-XTP 技术参数

是否Rohs认证: 符合生命周期:Transferred
包装说明:0.150 INCH, GREEN, PLASTIC, SOIC-8Reach Compliance Code:unknown
风险等级:5.81Is Samacsys:N
JESD-30 代码:R-PDSO-G8JESD-609代码:e3/e4
长度:4.9 mm功能数量:1
端子数量:8最高工作温度:125 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:SOP封装形状:RECTANGULAR
封装形式:SMALL OUTLINE峰值回流温度(摄氏度):260
认证状态:Not Qualified座面最大高度:1.72 mm
标称供电电压:5 V表面贴装:YES
电信集成电路类型:INTERFACE CIRCUIT温度等级:AUTOMOTIVE
端子面层:MATTE TIN/NICKEL PALLADIUM GOLD端子形式:GULL WING
端子节距:1.27 mm端子位置:DUAL
处于峰值回流温度下的最长时间:40宽度:3.9 mm
Base Number Matches:1

0ICAA-001-XTP 数据手册

 浏览型号0ICAA-001-XTP的Datasheet PDF文件第2页浏览型号0ICAA-001-XTP的Datasheet PDF文件第3页浏览型号0ICAA-001-XTP的Datasheet PDF文件第4页浏览型号0ICAA-001-XTP的Datasheet PDF文件第5页浏览型号0ICAA-001-XTP的Datasheet PDF文件第6页浏览型号0ICAA-001-XTP的Datasheet PDF文件第7页 
AMIS-42675 High-Speed Low Power CAN Transceiver  
For Long Networks  
Data Sheet  
1.0 General Description  
The AMIS-42675 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus. It  
may be used in both 12V and 24V systems. The transceiver provides differential transmit capability to the bus and differential receive  
capability to the CAN controller.  
The AMIS-42675 is the low power member of the CAN high-speed transceiver family and offers the following additional features:  
Ideal passive behaviour when supply voltage is removed  
Wake-up over bus  
Extremely low current standby mode  
Due to the wide common-mode voltage range of the receiver inputs, the AMIS-42675 is able to reach outstanding levels of electro-  
magnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the  
output signals.  
The AMIS-42675 is the industrial version of the AMIS-42665 and primarily for applications where long network lengths are mandatory.  
Examples are elevators, in-building networks, process control and trains. To cope with the long bus delay the communication speed  
needs to be low. AMIS-42675 allows low transmit data rates down 10 Kbit/s or lower.  
2.0 Key Features  
Compatible with the ISO 11898 standard (ISO 11898-2, ISO 11898-5 and SAE J2284)  
Wide range of bus communication speed (0 up to 1 Mbit/s)  
Ideally suited for 12V and 24V industrial and automotive applications  
Allows low transmit data rate in networks exceeding 1 km  
Extremely low current standby mode with wake-up via the bus  
Low electromagnetic emission (EME): common-mode choke is no longer required  
Differential receiver with wide common-mode range (+/- 35V) for high EMS  
Voltage source via VSPLIT pin for stabilizing the recessive bus level (further EMC improvement)  
No disturbance of the bus lines with an un-powered node  
Thermal protection  
Bus pins protected against transients  
Power down mode in which the transmitter is disabled  
Bus and VSPLIT pins short circuit proof to supply voltage and ground  
Logic level inputs compatible with 3.3V devices  
At least 110 nodes can be connected to the same bus  
3.0 Ordering Information  
Table 1: Ordering Information  
Ordering Code (Tubes)  
Ordering Code (Tape)  
Marketing Name  
Package  
Temp. Range  
0ICAA-001-XTD  
0ICAA-001-XTP  
AMIS 42675AGA  
SOIC-8 GREEN  
-40°C…125°C  
AMI Semiconductor –October 07, Rev. 1.0  
www.amis.com Specifications subject to change without notice  
1

与0ICAA-001-XTP相关器件

型号 品牌 描述 获取价格 数据表
0ICAB-001-XTD AMI High-Speed CAN Transceiver

获取价格

0ICAB-001-XTP AMI High-Speed CAN Transceiver

获取价格

0ICAG-001-XTD AMI High Speed CAN Transceiver

获取价格

0ICAG-001-XTP AMI High Speed CAN Transceiver

获取价格

0ICAH-002-XTD AMI High-Speed CAN Transceiver

获取价格

0ICAH-002-XTP AMI High-Speed CAN Transceiver

获取价格