High Dynamic Range Low Noise Amplifier
800 - 1000 MHz
AM50-0003
V4
Functional Block Diagram
Features
• Low Noise Figure: 1.2 dB
• High Input: +18 dBm at 8 V, 60 mA bias
+6.5 dBm at 3 V, 20 mA bias
• High Gain: 15 dB
• Single Supply: +3 to +8 VDC
• Low Cost SOIC-8 Plastic Package
• Adjustable current: 20 to 80 mA with external
resistor
GND
REXT
GND
VDD
RF IN
GND
RF OUT
GND
Description
M/A-COM’s AM50-0003 is a high dynamic range,
GaAs MMIC, low noise amplifier in a low cost, SOIC
8-Lead, surface mount, plastic package. It employs
external
input
matching
to
obtain
optimum noise figure performance and operating
frequency flexibility.
The AM50-0003 also
features flexible biasing to control the current
consumption vs. dynamic range trade-off. The
AM50-0003 can operate from any supply voltage in
Pin Configuration
Pin No.
Pin
Description
the 3V to 8V range.
Its current can be
Name
controlled over a range of 20 mA to 80 mA with an
external resistor.
1
2
GND
RF and DC Ground
REXT
External Current Control (optional)
The AM50-0003 is ideally suited for use where low
noise figure, high gain, high dynamic range, and low
3
4
5
6
7
8
RF IN
GND
RF Input of the amplifier
RF and DC Ground
power consumption are required.
Typical
applications include receiver front ends in AMPS,
GSM, and ETACS base stations. It is also useful as
a gain block, buffer, driver, and IF amplifier in both
fixed and portable cellular and 900 MHz ISM
systems.
GND
RF and DC Ground
RF OUT
VDD
RF Output of the amplifier
Positive supply voltage
RF and DC Ground
GND
The AM50-0003 is fabricated using a low-cost 0.5-
micron gate length GaAs process. The process
features full passivation for increased performance
reliability. The AM50-0003 is 100% RF tested to
ensure performance specification compliance.
Absolute Maximum Ratings 1
Parameter
VDD
Absolute Maximum
+10 VDC
Input Power
+17 dBm
Current2
120 mA
Ordering Information
Channel Temperature3
Operating Temperature
Storage Temperature
+150°C
Part Number
AM50-0003
Package
Bulk Packaging
1000 piece reel
Sample Test Board
-40°C to +85°C
-65°C to +150°C
AM50-0003TR
AM50-0003SMB
1. Exceeding any one or combination of these limits may cause
permanent damage.
2. When pin #2 is used to increase current. (see note 6)
3. Thermal resistance (θjc) = +88°C/W
Note: Reference Application Note M513 for reel size
information.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.