AM1DR Series
1 watt dc-dc converters
7PIN SIP PACKAGE
•
•
•
•
INPUT/OUTPUT ISOLATION: 1000 & 3000VDC
OPERATING TEMPERATURE: -40°C ... +85°C
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
•
•
•
REGULATED OUTPUT VOLTAGE
LOW RIPPLE & NOISE
HIGH EFFICIENCY UP TO 70%
GENERAL DESCRIPTION
Our AM1DR series is a family of cost effective 1W single
output isolated DC-DC converters. These converters
achieve low cost and ultra-miniature SIP7 pin size without
compromising performance and reliability.
Thirty models operates from input voltages of 5, 12 &
24VDC; producing regulated output voltage levels of
3.3, 5, 9, 12, 15VDC. Full SMD-design and a 100%
production test of parameters ensures a high reliability in
this product.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
Voltage range
Filter
General Specifications:
Efficiency
Switching frequency
±10%
Capacitor
58% to 70%
125KHz, typ. 100% load
Environmental Specifications:
Isolation Specifications:
Operating temperature (ambient) -40°C ... +85°C
Rated voltage (60 sec)
1000VDC
3000VDC
> 1000MOhm
60pF, typ.
Storage temperature
Case Temperature
Derating
Humidity (non-condensing)
Cooling
-55°C ... +125°C
+95°C, max.
Resistance
Capacitance
None required
Up to 90%
Free-air Convection
Output Specifications:
Voltage accuracy
±3%, max.
Physical Specifications:
Dimensions
Ripple & noise (at 20MHz BW) 50 mVp-p, max.
19.50x7.20x10.00mm
0.76x0.28x0.39inches
2.7g
Non-conductive black
plastic
Short circuit protection
Line voltage regulation
Load voltage regulation
Temperature coefficient
Momentary
±0.5%, max.
±0.5%, max.
±0.02%/ºC, typ.
Weight
Case material
MTBF: > 880,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
20
TO ORDER CALL 1-888-9-AIMTEC