AM- / AMC- / AMS-162
Low Noise Amplifier, 12.5 dB Gain,
10 - 100 MHz
Rev. V5
Features
TO-8-1
•
•
•
•
1.1 dB Typical Low Noise Figure @ 50 MHz
+15 dBm Typical High Output Power @ 50 MHz
+32 dBm Typical Third Order Intercept @ 50 MHz
Fully Hermetic Package (AM-162, AMS-162)
Description
M/A-COM’s AM-162 is a coupler feedback amplifier
with high intercept and compression points. The use
of coupler feedback minimizes noise figure and
current in a high intercept amplifier. This amplifier is
packaged in a TO-8-1 package, a surface mount
package and a connectorized version. The ground
plane on the PC board should be configured to
remove heat from under the package. AM-162 are
ideally suited for use where a high intercept, high
reliability amplifier is required.
Outline Drawing: SMA Connectorized *
SF-1
∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
Absolute Maximum Ratings 1
Parameter
Max. Input Power
Vbias
Absolute Maximum
Pin Configuration (For AMS-162)
+10 dBm
+15.75 V
Pin No.
Function
RF OUT
VDC
Pin No.
Function
RF IN
Operating Temperature
Storage Temperature
-55°C to +85°C
-65°C to +125°C
1
3
2
4
GND
1. Operation of this device above any one of these parameters
may cause permanent damage.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.