AL5873Q
55V/250mA THREE-CHANNEL LINEAR LED DRIVER
Description
Pin Assignments
Top View
The AL5873Q is an automotive-grade three-channel linear LED
driver with PWM dimming and analog dimming control. Each channel
can drive up to 250mA with a total driving current up to 750mA. The
LED channel current of the AL5873Q can be set by two reference
resistors connected to the REF1 and REF2 pin.
VIN
NC
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
FAULTB
ADIM
REF1
FULL
REF2
LED1
LED2
LED3
PWM
NC
The AL5873Q regulates LED current for each channel, accurate
down to ±4%, with excellent dimming performance. The AL5873Q
enters standby mode to save power if no PWM signal is detected.
EP
NC
GND
GND
GND
The AL5873Q monitors the temperature and reduces the LED current
if the chip temperature exceeds the threshold temperature. And the
input under voltage lock-out (UVLO), LED string open / short
protection, over temperature protection (OTP), and fault indicator
(FAULTB) are designed for automotive applications to improve
system robustness.
9
TSSOP-16EP (Type DX)
The AL5873Q is available in TSSOP-16EP (Type DX) package.
Applications
Features
Automotive LED Inner Lamps
Rear Light – Tail and Stop Light, Rear Turn Indicator, Parking
AEC-Q100 Grade 1 Qualification
Light, Fog Light, Reverse Light
Wide Input Voltage Range from 5V to 55V
Each Channel Up to 250mA Current Capability
Set Stop and Tail Current Independently Through 2 Resistors
Switch LED Current Between Stop and Tail Function
Automatically via FULL Input
PWM Dimming via Both PWM Input and Power Supply
Analog Dimming via ADIM Input
Automatically Enter and Exit Standby Mode without Enable Pin
Internal Protections:
Input Under Voltage Lock-Out (UVLO)
LED String Open Protection
LED String Short Protection
Over Temperature Protection (OTP)
Thermal Fold-back if Chip Temperature Exceeds the Threshold
Fault Reporting: UVLO, OTP, LED Open, and LED Short
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The AL5873Q is suitable for automotive applications
requiring specific change control; this part is AEC-Q100
qualified, PPAP capable, and manufactured in IATF 16949
certified facilities.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 16
www.diodes.com
February 2021
© Diodes Incorporated
AL5873Q
Document number: DS42780 Rev. 2 - 2