AL5809Q
AUTOMOTIVE COMPLIANT 60V TWO TERMINAL CONSTANT CURRENT LED DRIVER
PowerDI123 (Type B)
Description
Pin Assignments
The AL5809Q is a constant current linear LED driver that provides a
cost-effective two-pin solution to LED driving. It has an excellent
temperature stability of 20ppm/°C with tight 5% current accuracy
over a wide voltage and temperature range. The AL5809Q comes in
various fixed output current versions removing the need for external
current setting resistors creating a simple solution for the linear
driving of LEDs. It supports both the high-side and low-side driving of
LED chains.
The AL5809Q turns on after a short delay once the voltage across its
terminals reaches approximately 1.5V. Its maximum 60V voltage
rating between input and output pins enables it to withstand high
peak transient voltages that can occur in automotive applications.
The AL5809Q is available in the thermally robust PowerDI®123 (Type
B) package. The AL5809Q has been qualified to AEC-Q100 and is
Automotive Compliant supporting PPAPs.
Applications
Features
Automotive Interior Lamps
Automotive Parking Lights
Instrumentation Illumination
Robust Power Dissipation Up to 1.5W for PowerDI123 (Type B)
-40°C to +150°C Junction Temperature Range
5% LED Current Tolerance
Large Number of Output Current Options available in
PowerDI123 (Type B) Package:
15mA, 20mA, 25mA, 30mA, 40mA, 50mA and 60mA
qualified to AEC-Q100 Grade 1
90mA, 100mA, 120mA, and 150mA qualified to
AEC-Q100 Grade 3
2.5V to 60V Operating Voltage Between Two Terminals
Automotive Compliant with TS16949 Certification
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
PPAP Capable (Note 4)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. Automotive products are AEC-Q100 qualified and are PPAP capable. Refer to http://www.diodes.com/quality/product_compliance_definitions/.
Typical Applications Circuit
PowerDI is a registered trademark of Diodes Incorporated.
1 of 12
www.diodes.com
August 2017
© Diodes Incorporated
AL5809Q
Document number: DS38233 Rev. 2 - 2