AL3069
FOUR-CHANNEL CURRENT SOURCE BOOST LED DRIVER
Description
Pin Assignments
The AL3069 is a high-efficiency four-channel boost controller for WLED
backlight applications. It operates over a wide input voltage range, from
4.5V to 60V.
(Top View)
CH4
ISET
OVP
RT
1 6
1 5
CH3
1
2
3
4
5
6
7
8
The current of the four channels is simply programmed from 20mA to
400mA with an external resistor. The current match between any
channels is ±0.5% (typical). Its operating frequency can be adjusted
from 0.1MHz to 1MHz.
GND
CH2
1 4
1 3
CH1
The AL3069 can support two independent dimming modes: direct PWM
dimming and PWM to analog dimming. This function makes AL3069
flexible to design in different dimming applications.
1 2
EN
PWMD
COMP
PWMA
VIN
CS
1 1
1 0
9
OUT
VCC
Robust protection features include cycle by cycle current limit, soft-
start, UVLO, programmable OVP, OTP, open/short LED protection,
Schottky diode short and open protection, inductor short-circuit
protection and VOUT short protection.
SO-16
The IC is available in SO-16 package.
Features
Applications
Input Voltage Range: 4.5V to 60V
LCD monitors
Drivers up to Four Strings in Parallel, 250mA per String, 400mA
Pulse Current
LCD display modules
LCD TVs
Typical ±0.5% Current Matching
Low Ripple for Low BOM Cost
4kV HBM ESD Class
High Voltage Pins CS and OVP for Safety Test
Supports Direct PWM Dimming, PWM to Analog Dimming
Minimum PWM Dimming Duty Cycle Can Be 1/5,000 at 100Hz
Dimming Frequency
LED Open/Short Protection
Schottky Diode/Inductor Short-Circuit Protection
Built-in OCP, OVP, OTP, UVLO, VOUT Short/Schottky Diode Open
Protection
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
For automotive applications requiring specific change
control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP
capable, and manufactured in IATF 16949 certified facilities),
please contact us or your local Diodes representative.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 16
www.diodes.com
June 2023
AL3069
© 2023 Copyright Diodes Incorporated. All Rights Reserved.
Document number: 45783 Rev. 2 - 2