ASAHI KASEI
[AK4115]
AK4115
High Feature 192kHz 24bit Digital Audio Interface Transceiver
GENERAL DESCRIPTION
The AK4115 is a 24-bit stereo digital audio transceiver that supports sampling rates up to 216kHz. The
channel status bit decoder supports both consumer and professional modes and can automatically
detect Non-PCM bit streams such as Dolby Digital or MPEG. The AK4115 supports a wide array of
features a couple of them being; differential cable driver and receiver support, and an internal PLL that
can support clock sources such as bi-phase and “word clock”. Control of AK4115 is achieved though a
µ
P or pin-strapping (parallel mode) and it is packaged in a space- saving 64pin-LQFP.
* Dolby Digital is a trademark of Dolby Laboratories.
FEATURES
AES3, IEC60958, S/PDIF, EIAJ CP1201 Compatible
Very Low Jitter Analog PLL
Synchronous / Asynchronous Mode
Include Two X’tal Oscillators
Clock Source: PLL or External Clock
- Reference Clock for PLL:
•
Biphase signal: 22kHz to 216kHz
• External Clock (ELRCK pin): 22kHz to 216kHz
8-channel Receiver input
- One channel supports Differential Input
2-channel Transmission output (Through output or DIT)
- One channel supports Differential Output (RS422 Line Output Buffer)
Auxiliary Digital Input
De-emphasis for 32kHz, 44.1kHz and 48kHz
Detection Functions
- Non-PCM Bit Stream Detection
- DTS-CD Bit Stream Detection
- Sampling Frequency Detection:
(22.05kHz, 24kHz, 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, 96kHz,
176.4kHz and 192kHz)
- Unlock & Parity Error Detection
- DAT Start ID Detection
Up to 24bit Audio Data Format
Audio Interface: Master or Slave Mode
192-bit Channel Status Buffer
Burst Preamble bit Pc and Pd Buffer for Non-PCM bit stream
Q-subcode Buffer for CD bit stream
2
µ
Serial P Interface: 4-wire or I C (max. 400kHz)
Two Master Clock Outputs: 64fs/128fs/256fs/512fs
Operating Voltage: 2.7 to 3.6V with 5V Logic Tolerance
Package: 64pin LQFP
°
Ta: -20 to 85 C
MS0573-E-00
2006/12
- 1 -