Accutek
Microcircuit
Corporation
24, 28 and 32 Pin 0.600” Wide
Dip Adapters with Pin Correction
DESCRIPTION
Features
· Saves costly redesign of current motherboards
· Fully tested with lifetime limited warranty
· Includes an on board decoupling capacitor
· IC assembly and testing available
The Accutek family of DIP Adapter Modules is designed to convert
any 32 pin, 28 pin or 24 pin digital integrated circuit in SOJ, PLCC,
TSOP and SOIC package to a top mounted DIP module. Accutek
DIP modules are a pin compatible drop in replacement for
end-of-life DIP devices. Typical devices are SRAMs, EPROMs and
Flash.
· EPROM and Flash programming available
· Custom lead lengths available
These DIP Adapters were developed for users with motherboard
designs that require DIP’s, now obsoleted by manufacturers.
These adapter modules save costly motherboard redesigns.
· Custom multi-chip and double-sided modules available
Accutek reserves the right to make changes in specifications at any
time and without notice. Accutek does not assume any responsibil-
ity for the use of any circuitry described; no circuit patent licenses
are implied. Preliminary data sheets contain minimum and maxi-
Accutek DIP Adapter Modules are fully assembled and tested and
include a decoupling capacitor. They can be manufactured turnkey
or from customer supplied surface mount chips. Modules range in
length from 1.200” to 1.600” depending on number of pins. All mod-
ules are 0.600” in width with lead spacing of 0.100”. Lead length can
range from 0.125” up to 0.200”. Custom lengths are also available.
ACCUTEK MICROCIRCUIT CORPORATION
BUSINESS CENTER at NEWBURYPORT
2 NEW PASTURE ROAD, SUITE 1
Custom multi-chip and double sided configurations are also avail-
able for special functions.
NEWBURYPORT, MA 01950-4054
PHONE:
E-Mail:
Internet:
978-465-6200
sales@accutekmicro.com
www.accutekmicro.com
FAX:
978-462-3396