AccuDIP Adapter Modules
DESCRIPTION
Features
· Saves costly redesign of current motherboards
· Fully tested with life time limited warranty
· Includes on board decoupling capacitor
· IC assembly and testing available
The Accutek family of AccuDIP Adapter Modules is designed to
convert any 32 pin, 28 pin or 24 pin digital integrated circuit in SOJ,
PLCC, TSOP and SOIC package to a top mounted DIP module.
These AccuDIP modules are a pin compatible drop in replacement
for end-of-life DIP devices. Typical devices are SRAMs, EPROMs
and Flash.
· EPROM and Flash programming available
· Custom lead lengths available
AccuDIPs were developed for users with motherboard designs that
require DIP’s, now obsoleted by manufacturers. These adapter
modules save costly motherboard redesigns.
· Custom multi-chip and double-sided modules available
Accutek Reserves the right to make changes in specifications at any time and without
notice. Accutek does not assume any responsibility for the use of any circuitry de-
scribed; no circuit patent licenses are implied. Preliminary data sheets contain mini-
mum and maximum limits based upon design objectives, which are subject to change
upon full characterization over the specific operating conditions.
AccuDIP Adapter Modules are fully assembled and tested and in-
clude a decoupling capacitor. AccuDIPs can be manufactured turn-
key or from customer supplied surface mount chips. Modules range
in length from 1.200” to 1.600” depending on number of pins. All
modules are 0.600” in width with lead spacing of 0.100”. Lead
length can range from 0.125” up to 0.200”. Custom lengths are also
available.
ACCUTEK MICROCIRCUIT CORPORATION
BUSINESS CENTER at NEWBURYPORT
2 NEW PASTURE ROAD, SUITE 1
Custom multi-chip and double sided configurations are also avail-
able for special functions.
NEWBURYPORT, MA 01950-4054
PHONE: 978-465-6200 FAX: 978-462-3396
E-Mail: accutek@seacoast.com
Internet: www.accutekmicro.com