AH3965Q/AH3966Q/AH3967Q/AH3968Q
AUTOMOTIVE DUAL HALL EFFECT LATCH
WITH SPEED & DIRECTION OUTPUT
Description
Pin Assignments
The AH3965Q/AH3966Q/AH3967Q/AH3968Q is an AEC-Q100
qualified high voltage dual Hall-effect sensor designed for the
applications that require accurate speed and direction sensing. To
support wide range of demanding applications, the design has been
optimized to operate over the supply range of 2.7V to 27V. With
chopper stabilized architecture and an internal bandgap regulator to
provide temperature compensated supply for internal circuits, the
AH3965Q/AH3966Q/AH3967Q provides speed and direction outputs,
while AH3968Q provides two independent outputs at Q1 and Q2.
(Top View)
VDD
GND
GND
1
2
3
5
4
DIR/Q1
SP/Q2
For robustness and protection, the device has a reverse blocking diode
with a Zener clamp on the supply.
In the occasion of a supply voltage drop to minimum threshold point,
undervoltage lockout protection would be triggered to freeze the
device, which prevents the electrical malfunction from affecting the next
magnetic measurement circuits, and the output current state updated
is always based on the proper accurate measurement result.
TSOT25 (Type A1)
Features and Performance
Applications
Dual Latch Hall Operation with Dual Outputs (AH3968Q) or
Speed & Direction Output (AH3965Q/AH3966Q/AH3967Q)
Wide Supply Voltage Operation: 2.7V to 27V
Power closures with anti-pinch features
Rotation speed & direction detection
Linear speed & direction detection
Angular position detection
Knob controls
Chopper Stabilized Design Provides
.
.
.
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
Battery Polarity Reverse Connection Protection
Transient Spike Voltage Protection
UVLO Protection
High ESD Rating: HBM = 5kV, CDM = 2kV
AEC-Q100 Grade 0 Qualified
Temperature Range: -40°C to +150°C
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
The AH3965Q/AH3966Q/AH3967Q/AH3968Q is suitable for
automotive applications requiring specific change control;
this part is AEC-Q100 qualified, PPAP capable, and
manufactured in IATF16949 certified facilities.
https://www.diodes.com/quality/product-definitions/
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 18
www.diodes.com
April 2023
AH3965Q/AH3966Q/AH3967Q/AH3968Q
© 2023 Copyright Diodes Incorporated. All Rights Reserved.
Document number: DS43742 Rev. 1 - 2