AH3965/AH3966/AH3967/AH3968
DUAL HALL-EFFECT LATCH
WITH SPEED & DIRECTION OUTPUT
Description
Pin Assignments
The AH3965/AH3966/AH3967/AH3968 is a high voltage dual Hall-
effect sensor designed for the applications that require accurate speed
and direction sensing. To support the wide range of the demanding
applications, the design has been optimized to operate over the supply
range of 2.7V to 27V. With chopper stabilized architecture and an
internal bandgap regulator to provide temperature compensated supply
for internal circuits, the AH3965/AH3966/AH3967 provides speed and
direction outputs, while the AH3968 provides two independent outputs
at Q1 and Q2.
(Top View)
VDD
GND
GND
1
2
3
5
4
DIR/Q1
SP/Q2
For robustness and protection, the device has a reverse blocking diode
with a Zener clamp on the supply.
TSOT25 (Type A1)
In the occasion of a supply voltage drop to minimum threshold point,
undervoltage lockout protection would be triggered to freeze the
device, which prevents the electrical malfunction from affecting the next
magnetic measurement circuits, and the output current state updated
is always based on the proper accurate measurement result.
Features and Performance
Applications
Dual Latch Hall Operation with Dual Outputs (AH3968) or Speed
& Direction Output (AH3965/AH3966/AH3967)
Wide Supply Voltage Operation: 2.7V to 27V
Chopper Stabilized Design Provides
Industrial motors
White goods
Pumps
Rotation speed & direction detection
Linear speed & direction detection
Angular position detection
.
.
.
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
Battery Polarity Reverse Connection Protection
Transient Spike Voltage Protection
UVLO Protection
High ESD Rating: HBM = 5kV, CDM = 2kV
Temperature Range: -40°C to +125°C
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
An automotive-compliant part is available under separate
datasheet (AH396XQ)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 18
www.diodes.com
November 2023
© 2023 Copyright Diodes Incorporated. All Rights Reserved.
AH3965/AH3966/AH3967/AH3968
Document number: DS43741 Rev. 2 - 2