AH1925
ULTRA-LOW POWER DIGITAL OMNIPOLAR
HALL EFFECT SWITCH
Description
Pin Assignments
(Top View)
The AH1925 is an ultra-low power digital and high sensitivity
omnipolar Hall effect switch IC from Diodes Incorporated’s broad Hall
Effect switches family. The sensitive device is designed to meet a
wide range of potential applications with low power requirements
including battery-operated equipment, the average supply current is
only 1.4μA at 1.85V. To support portable equipment the AH1925 can
operate over the supply range of 1.6V to 3.6V and uses a hibernating
clocking system to minimize the power consumption. The high ESD
level up to 8kV helps to improve the system robustness. To minimize
PCB space the AH1925 is available in small low profile X2-DFN1410-
4 package.
VDD
OUTPUT
1
4
The single open-drain output can switch on with either a north or
south pole of sufficient strength. When the magnetic flux density (B)
perpendicular to the package is larger than operate point (BOP) the
output is switched on (pulled low). The output is turned off when
B becomes lower than the release point (BRP).
3
2
NC
GND
X2-DFN1410-4
Features
Omnipolar Operation (North or South Pole)
Supply Voltage of 1.6V to 3.6V
Micropower Operation
Applications
Chopper Stabilized Design Provides:
.
.
.
Superior Temperature Stability
Minimal Switch Point Drift
Smart Cover or Dock Detect for Cellular Phones and Tablet PCs
Gas or Water Consumption Measurement in Remote, Battery-
Operated Utility Meters
Enhanced Immunity to Physical Stress
AH1925 is Open-Drain Output
Medical Devices, IoT Systems
-40°C to +85°C Operating Temperature
Level, Proximity and Position Switches
High ESD Capability of 8kV (Human Body Model)
Small Low Profile, X2-DFN1410-4 Package
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
E-Locks, Smoke Detectors, Appliances
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and
Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
1 of 9
www.diodes.com
September 2019
© Diodes Incorporated
AH1925
Document number: DS42243 Rev. 1 - 2