5秒后页面跳转
AH172-WLA-A PDF预览

AH172-WLA-A

更新时间: 2024-02-18 05:32:57
品牌 Logo 应用领域
ICT 光电二极管
页数 文件大小 规格书
6页 189K
描述
Analog Circuit, 1 Func, BIPolar, PDSO3, LEAD FREE, SOT-23, 3 PIN

AH172-WLA-A 技术参数

生命周期:Obsolete零件包装代码:SOT-23
包装说明:LSSOP,针数:3
Reach Compliance Code:unknownHTS代码:8542.39.00.01
风险等级:5.84模拟集成电路 - 其他类型:ANALOG CIRCUIT
JESD-30 代码:R-PDSO-G3长度:2.9 mm
功能数量:1端子数量:3
最高工作温度:85 °C最低工作温度:-20 °C
封装主体材料:PLASTIC/EPOXY封装代码:LSSOP
封装形状:RECTANGULAR封装形式:SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
认证状态:Not Qualified座面最大高度:1.35 mm
最大供电电压 (Vsup):20 V最小供电电压 (Vsup):3 V
标称供电电压 (Vsup):12 V表面贴装:YES
技术:BIPOLAR温度等级:OTHER
端子形式:GULL WING端子节距:0.95 mm
端子位置:DUAL宽度:1.6 mm

AH172-WLA-A 数据手册

 浏览型号AH172-WLA-A的Datasheet PDF文件第2页浏览型号AH172-WLA-A的Datasheet PDF文件第3页浏览型号AH172-WLA-A的Datasheet PDF文件第4页浏览型号AH172-WLA-A的Datasheet PDF文件第5页浏览型号AH172-WLA-A的Datasheet PDF文件第6页 
AH172  
Internal Pull-up Hall Effect Latch  
„ Features  
„ General Description  
- Bipolar Hall effect latch sensor  
- 3.0V to 20V DC operation voltage  
- Built-in pull-up resistor  
AH172 is a single digital output Hall-effect sensor  
with pull-up resistor for high temperature operation.  
The device includes an on-chip Hall voltage  
generator for magnetic sensing, an amplifier to  
amplify Hall voltage, and a comparator to provide  
switching hysteresis for noise rejection, and an  
output driver with a pull-up resistor (Rpu). An  
internal bandgap regulator is used to provide  
temperature compensated supply voltage for  
internal circuits and allows a wide operating supply  
range. While the magnetic flux density (B) is larger  
than operate point (Bop), the OUT pin turns on  
(low). If B removed toward release point (Brp), the  
OUT pin is latched “on” state prior to B < Brp. When  
B < Brp, the OUT pin go into “ off ” state.  
- 25mA output sink current  
- Operating temperature: -20°C to 85°C  
- Package: SIP3, SOT23  
„ Applications  
- Rotor position sensing  
- Current switch  
- Encoder  
- RPM detection  
„ Pin Descriptions  
„ Pin Assignments  
(Top view)  
Name  
VCC  
GND  
OUT  
Description  
Positive power supply  
Ground  
3.  
OUT  
2. GND  
1. VCC  
Output stage  
(SIP3 package)  
OUT  
3.  
GND 2.  
1. VCC  
( SOT23 package)  
„ Ordering Information  
AH172 X - X X X - X  
Magnetic  
Packing  
Wafer Body  
Package  
P: SIP3  
W: SOT23  
Lead  
Characteristics  
Blank or  
L :Lead Free  
Blank :Bulk  
A or B  
A~Z : if necessary  
to specify  
A
: Tape & Reel  
(for SOT23 Only)  
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of  
this product. No rights under any patent accompany the sale of the product.  
Rev. 1.0 Oct 6, 2005  
1/6  

与AH172-WLA-A相关器件

型号 品牌 描述 获取价格 数据表
AH172-WLA-B ICT Analog Circuit, 1 Func, BIPolar, PDSO3, LEAD FREE, SOT-23, 3 PIN

获取价格

AH172-WLA-B ANACHIP Sensor/Transducer, Passive Pull-up, Bipolar, 3 Pin, Plastic/epoxy,

获取价格

AH172-WL-B DIODES Sensor/Transducer, Passive Pull-up, Bipolar, 3 Pin, Plastic/epoxy,

获取价格

AH173 DIODES INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE

获取价格

AH173 ANACHIP Internal Pull-up Hall Effect Latch For High Temperature

获取价格

AH173_10 DIODES INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH

获取价格